Solar distiller can be used for extraction, desalination, marine and cleaning dirty water, also for collecting rainwater.
From his appearance on the web are in the main drawing, schematic drawing, at least the last photo was not found. Will try to correct this gap.
If you have ventured to build a distiller, it means your business is already quite bad, water supplies are depleted, and the latest for you to take anywhere. Taking into account that the distiller effective only in those places where the day is hot, and the night is cold and he gives 350-400 g of water a day (some sources 500-550), you need to use your loaf, it may be worth to spend your energy on finding another source of water?
For distiller elected accurate solar space and prepare all necessary that it should be in our emergency kit.
The knife (as sticks, implied that shovels we don’t have);
Plastic bag 120 HP (size h cm);
Four pegs pointed with one hand and with the groove on the other (for markup and as stops);
Four malehankih and one huge bumps;
The line about 1 meter (for stretch marks);
Capacity (in our case, mug, although entirely possible to use the bottom part of the aluminum box from the set);
Tube (if the distiller is planned to put in perpetuity);
The top cover from the box (to remove the earth).
Different sources recommend different length-width (0.9-1 m) and deep (0.45-0.5 m) hole distiller. We adhere to the view that it is not necessary, and the need to consider the size of the available cellophane. In our case, if cut 120 litre bag from under the debris produced h cm, taking into account what you need to throw on left "slack" and on the mount and determined the length-width of the pit.
Line a may be not always, because it is useful to know the length of his own knife, in our case the length "Sable" – 22 see "the Sables" and we will create the markup.
Mark hole : length – 4 "sable" width – 3.5 "sable" and depth – 2 "sable". Do the circuit and starting to take off, humus, and then dig square-cluster method.
Setting in the finished pit containers to collect water and extending drinking tube out, start doing PE "the roof". Cut the bag, some sources recommend polarcat stone cellophane from the inner side to give it a surface roughness, in our view is to do it with an eye on the quality of the material, so long and tear. Although not really even need this roughness. Make loops on the line put on the peg and binds it to the corners of the cellophane with the help of cones.
Install plastic sheeting over the hole, adjust the stretch, put a lump, covered with humus and then land. To increase the performance of a solar still, you can optionally put a hole in the grass or branches with leaves. Everything is ready, now just to wait.