Bang of a tree

I will tell you about three ways. weaving double layered rope: free weaving, weaving Also find here a list of materials. most suitable for making ropes.

It is a great deal of effort.

You need to be in the process of weaving.

It is necessary to double-layer rope. This is clearly not enough. Also such ropes are used in bushkraft.

Making a loop

Every time you weave a rope or “eye line” or “eye” or loop.

It is easier to grip during twisting. Instead of submerging the fibers themselves, then passing it through them. This is enough to hydrate.

Take the fiber and bend it in half. In the middle of it, it’s not. So try to ensure that the fibers run out at different times.

Now start twisting the fibers in opposite directions. They will be a form of “eye” or loop. There will be a few more loops will appear. However, this is not the fastest and controlled rope weaving method, so on.

Free weaving

Most often used for weaving thick ropes, although it is a strong and uniform cords. I understand the colors of different colors.

1 – where there are two strands of hair meet.

2 – it is furthest from you (A), (turning away from you).

3 – eping change bring bring bring bring change change change change change change change change change change change change change change change change change change change Fig Fig Fig Fig Fig 3

4 – Repeat with the “B” thread, which is now further away from you. In the case of two threads, meet each other. The desired length.

With some practice, this rope weaving method fingers of light. It shows a little bit more efficiently.

Finger weave

Great technique for weaving thin ropes, cords and fishing line.

1 – where there are two strands of hair meet.

2 – Twist both threads on the index finger, using the thumb. It should not be intersect, but only can be curved around their axis.

This will help maintain the tension. It is a spinning pattern. It can be completely screwed up.

Note. It will be useful to pre-twist. For grip.

Hip weave

Used primarily for making thin ropes. You can get a lot of time for you. for example, to create a fishing net. For this method, the fibers must be pre-moistened.

1 – where there are two strands of hair meet.

2 – Use your palm to twist both threads along your hip. It should not be intersect, but only can be curved around their axis.

3 – Clamp the threads with your palm. It is a spinning pattern. It can be completely screwed up.

Adding new fibers

It is thinner than another. The thread will be strong and reliable.

For clarity, I add fiber of a different color.

It comes to thinner hair. Fixing the new fiber. Then continue.

An example of bad and good weaving. Bad (top) – has been thinner and wrapped around the second. This will make it possible to reduce the overall strength of the rope. It has been shown that it has been distributed evenly.

Materials suitable for weaving ropes

Durable:

  • Nettle fiber
  • Linden fibers
  • Willow fibers
  • Animal tendons
  • Hair, especially horse hair

Medium strength:

  • Inner elm bark
  • Inner willow bark (boiled in water and wood ash)
  • Sweet Chestnut Inner Bark
  • Honeysuckle bark
  • Clematis (or Clematis) bark

Weak Used only in special situations:

  • Reed (preferably dried)
  • Grass (long and thick grass ropes are quite durable)
  • Sedge

Original – 2-ply Cordage Making Techniques

DIY rope. Part 4: Ways of Weaving

Like this post? Please share to your friends:
Leave a Reply

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!:

SQL - 52 | 0.878 сек. | 6.24 МБ