Dryer for fish with a fan – how to do it yourself

Dehydrator, or dryer for fish or meat – a thing necessary for many fishermen and hunters to use as one of the ways to process their prey. In order not to spend money on an industrial design, a fish dryer can be made with your own hands with minimal financial costs.

  • Types of dryers
  • Dryer for fish meat with fan

Types of dryers

Dryer for fish, do it yourself
Of course, the most inexpensive variant of the dehydrator is the usual clothesline, on which the fish is strung and placed somewhere under the roof or on the balcony. With all the simplicity, this option does not exclude the infection of fish in the process of drying by the larvae of various insects, as well as from sitting out with flies. Therefore, the most practical and reliable for food dryers always have a design with walls that protect prey from flies, other insects and pollution from the street, but contribute in one way or another to free air circulation. By design, dryers for fish or meat are different:

  • Suspended
  • Collapsible
  • Stationary
  • With fan

Suspended dryers differ from stationary in that, according to their name, they are suspended from the wall, so you can adjust their height and position, which is convenient when choosing the most successful place by the amount of sun or wind. Collapsible dryers are very convenient because they can be disassembled for compact storage at a time when they are not used. In addition, they are mobile, and during long fishing catch can be immediately placed in the dryer right on the shore of the reservoir. All of these dryers are adapted to dry fish in the open air. What to do if there is no such possibility, or the fish should be dehydrated in winter? In this case, help dryer for meat and fish with a fan, which is quite simple to do with your own hands.

DIY fish dryer with fan
Of course, the most inexpensive variant of the dehydrator is the usual clothesline, on which the fish is strung and placed somewhere under the roof or on the balcony. With all the simplicity, this option does not exclude the infection of fish in the process of drying by the larvae of various insects, as well as from sitting out with flies. Therefore, the most practical and reliable for food dryers always have a design with walls that protect prey from flies, other insects and pollution from the street, but contribute in one way or another to free air circulation. By design, dryers for fish or meat are different:

  • Suspended
  • Collapsible
  • Stationary
  • With fan

Suspended dryers differ from stationary in that, according to their name, they are suspended from the wall, so you can adjust their height and position, which is convenient when choosing the most successful place by the amount of sun or wind. Collapsible dryers are very convenient because they can be disassembled for compact storage at a time when they are not used. In addition, they are mobile, and during long fishing catch can be immediately placed in the dryer right on the shore of the reservoir. All of these dryers are adapted to dry fish in the open air. What to do if there is no such possibility, or the fish should be dehydrated in winter? In this case, help dryer for meat and fish with a fan, which is quite simple to do with your own hands.

DIY fish dryer with fan

Dryer for fish meat with fan

In order to make a dryer with a fan, you will need the following materials:

  • Plastic container with a lid. You can use a plastic box for children’s toys.
  • Hood with grill for output. Sufficient fan capacity is 280 cubic meters. Instead of a ventilation hood, you can use a PC cooler.
  • Threaded rod on M8 or M6; metal rods with a diameter of 3 mm can also be used.
  • Nuts, washers, bolts.

The sequence of the dehydrator manufacturing works is as follows:

  1. At the bottom of the box on its short side part, it is necessary to mark the place with a marker for mounting the ventilation hood. It also marks the place of fixing the grill for the hood, best of all, if it is located on the lid. If this is not possible, it is embedded on the opposite side of the fan in its upper part. Holes can be cut with a jigsaw, circular saw-bit of a suitable diameter, or use a drill with a thin drill: holes are drilled around the perimeter of the circumference, then the jumpers between them are removed with a regular knife. If you heat the blade of the knife, the plastic will be easier to cut.
  2. The fan and the grid for the hood are installed in the prepared holes, fixed to the walls of the box with fasteners. The grid can be planted on liquid nails.
  3. Next you need to mark the location of the holes for the rod, which will keep the fish or pieces of meat during drying. To do this, masking tape is glued along the perimeter of the box, and marking is applied to it. Holes are drilled by a screwdriver or a drill. Another option for mounting the rod for drying – using duralumin corners. They are fixed on the long sides of the container with a shelf downwards, bolted, and through the shelves of the corners are arranged through holes for the rod. With the help of such corners inside the drying can be done several rows.
  4. The threaded rod is cut into the required number of bars of the desired length using a hacksaw.
  5. The rods are inserted into the holes, fixed with nuts and washers. If there is a need to dry something roomy, you can loosen the nuts and remove the rods.
  6. The fish is strung on the rods through the eyes or clings to the hooks and hung out on the rods. Then the container is closed with a lid, the fan is turned on, the box is placed in any convenient place for several days.

Dryer for fish meat with fan
Such a dehydrator is universal, since it is used not only for drying fish, but it is also a dryer for meat, vegetables or fruits. In addition, if you put thick parchment on the rods, you can dry small products. – berries and mushrooms. The dryer from the container is quite capacious, airtight, protects the products from the penetration of any insects. The speed of drying products will depend on what the temperature outside the dehydrator. Modify such a dryer can be, if you install a special adapter-timer to set the operating time, as well as a device that gives in warm air.

Like this post? Please share to your friends:
Leave a Reply

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: