If your home is connected to a traditional water supply, like the pipes in the city, you depend on the rest of the civilization for your water. If the system starts to fail or if someone interrupts the connection to your water supply, it is lost. You have nothing for your family. But if you know how to dig a well, you can keep your family well supplied with water in everything you need.
No matter what happens, you will have your own supply and that is something important when you are not sure about the future. That’s also why you want to learn how to dig a well.
Making it legal
The first thing you should do is make sure that you are allowed to have a well on your property. If you live in the city, for example, or even in some municipalities, you may not be allowed to do so due to laws and ordinances. He definitely does not want to put all that work in his well and then be forced to shoot him down because he broke the law. So make sure you know where you can be, what size you can have and everything you can find, because it’s going to be hard to do, do not do it at all.
Keep it clean
If you are going to be drinking from your well, you will want to make sure that the water is clean. That means keeping it away from things like swamps, septic tanks and cisterns. It will not always be easy to find the perfect place, but staying away from all these things will be essential to keep the water clean and safe to drink. But do not just find the septic tank, follow the lines to make sure it is at least 50 feet away at all times. Then, be sure to stay away from the power lines as well.
Be sure to go at least 50 feet away from buried fuel tanks or septic systems, as well as 100 feet away from pastures and 5 feet from places such as barns, construction sites and anything else that may contaminate your water . You will also want a relatively deep well, so if you reach the water within 10 feet or less, you need to find a different place for your well. The water that is so close to the surface will not be as clean as the one you are looking for.
Check your equipment
To make your well you will need many different types of equipment, including your water and storage system. That is going to mean pumps, filters and a tank. Each one will depend on what you need in your home, including the amount of performance you need and, definitely, the flow rate you will need based on your family and the details of your garden as well. It will be important for the longevity of the pump that you know each of these details.
Choose a pump and lines that will support the amount of performance you want but will not end up drying out frequently. If the pump dries, it will begin to wear out and break down much faster and that is not something you will want. Replacing a pump can be extremely expensive and difficult to do as well. So make sure you are able to operate with your high and low performance amounts at the same time so you do not have any problems with the use (or non-use).
If you are really looking to leave the network, you may want to completely bypass the pump and the pipes and simply dig a hole where you can lower a bucket to get the water out. These wells are a bit more outdated, but if your plan is to make sure you have access to water, no matter what happens to the rest of the world, this will be the best option because you will not have to worry about things like having energy and maintaining the pipes clean and ready for when you need them.
It is also less likely to suffer damage somewhere between the well and your home that disconnects your water supply.
The most important thing is to start well because if you do not do it well, it will be difficult for you to put your well back on track. So be sure to find the right place for your well and try the area before you start. If you can get a sample of the water in the area first, you can check for bacteria and other things on the ground that could make your water unsafe to drink from that area. It may take several attempts to find the right place with clean and safe drinking water.
Once you have found the right place, you will be ready to start digging. Just make sure you have enough space for the well you want and also have all the tools you will need. Your well will require at least a good quality shovel and a tool so you can test the oxygen at the bottom of the well.
What you may not know is that the lower you get the less oxygen you could have and if you enter that well with nothing but carbon monoxide, you could be in big trouble. Testing your well before you start digging every day will be essential.
If you test the well and the oxygen is low, all you need to do is wait a bit before retesting and lowering. The carbon monoxide will fade in a few hours and it will be fine to start over. But if you do not do the test, you will faint, and if someone does not take it out, it could be fatal in the end. Never skip this extremely important step.
Start by marking the entire outer edge of your well. You can use the same selection and shovel, as well as your bucket to mark it as you will to start your digging process. Just keep in mind that this area should not only be large enough to allow you to easily lower the bucket to extract the water, but it should also be large enough to fit inside it and dig the well. If you want help, you’ll need it even bigger.
Make it the right size
Start by writing down the size you want your well to have and then start digging. Try to dig evenly all the way so you do not end up standing in a small hole and try to make it bigger. While you are close to the surface, it is probably best to try to dig from outside your circle. This will give you better leverage and much more space to throw dirt and debris, since you are dragging one load after another, that way you can find the right place to throw away all the debris while you can still see them.
Once you start to descend and it is difficult to bend down to pick up the dirt, you will want to get into your well to start digging. Make sure you are always digging with someone nearby in case of a problem. Hand-dug wells can easily give way and, if there is no one nearby, could be trapped. While digging, be sure to watch the walls around you. There should always be a ladder or rope in the hole with you so that the exit process is quick and easy, and you will always want someone to stand on the other end and also watch.
When you lower as low as you want, you can hold the walls and make sure they do not sink while you try to use the well. Once it’s full of water, you will not be able to come back down to take out the rocks and debris, after all. So be sure to hold the walls with stones, bricks or tiles of some kind before you reach the bottom of your well.
Of course, it is not easy to know exactly where you will fall into the water, but you should be able to get a good idea of your tests and your work. You want to make sure you have the walls secured as you go, but before you have finished installing a more efficient and resilient system, because placing it too soon makes it difficult to dig the well. Make sure to use a bucket to help remove excess dirt and materials as you go, this is another reason to have someone else on the outside.
If you have to fill the bucket, climb, pull the bucket, throw it and go back down to start again, it will take a long time and you will have to work much more. What you need The best thing is to get someone else to stand at the top and take out the bucket when it is full to download it and then send it back to you. You can even switch between jobs to make it more efficient and a little less hard for your body.
When you begin to approach the water table, make sure you are watching carefully while digging. At the beginning, the water will slowly start to get inside you and that’s when you want to make sure that you really start paying attention. The first portion of water can come out and continue digging to go a little deeper into your well and get better access to clean water. When the water begins to enter faster than you can rescue it is when you need to leave quickly.
Waiting for it to fill
Your well could take a while to fill up with water. Once you do, you’ll want to make sure you try it again. He does not want to give his family something that will make them sick and, although he has already analyzed his groundwater, he must make sure that nothing has changed since he performed the last test. It would really be unfortunate if he dug all his well and then had to dig a new one because it was contaminated, but it would be much worse to give contaminated water to his family.
Once the well is full and you have tried it, you will want to place it on a cover. You can choose to accumulate in your frame for the well, add more bricks and stones to make it higher on the top and easier to take out a bucket, or you can choose to simply add a lid on the ground. Either way, you want to make sure you put something there to keep your water protected from insects or other debris that can contaminate your water source.
Building the frame
If you want your well to look like the one you’ve probably seen a million times in people’s courtyards, you should build it above the ground. Now, those wells you’ve seen are probably decorative that want wells for your garden and not real functioning wells, but you can make yours look like those if you want. The key is to make sure that you build a solid and strong frame that can support some weight and provides a counterbalance for when you try to pull that large bucket of water from the bottom.
You can use stones or bricks to make the frame of the well, but make sure you stick to the frame you have already built and that you are securing the stones together. You can use cement for this part, but make sure that each layer of stones or bricks is well secured to the previous one before moving on to the other. You should also make sure to keep each layer as wide as the one below. Do not start making smaller circles or you could end up with something that collapses or that does not allow your cube to fall easily to the bottom.
Once you have the frame as high as you want, you will be ready to place the rest. Add bars on each side to hold the roof and the bucket itself. A bar should go to each side and then have one in the center. The central bar is where you will have your counter support when you lift the bucket after it is filled with water. You want to make sure it is securely fastened to make sure you do not lose your bucket when it gets heavy and pulls against the crossbar.
If you wish, you can even place a revolving bar with a handle so you do not have to lift the bucket, but you can rotate the handle to lift it. This makes the process much easier, but it will require a little more work at the beginning. Just make sure to hold it firmly so that it turns easily but does not come loose. You will also need to attach one end of the rope to the frame and roll it up so that it can continue to spin easily. If you have to pull the rope up anyway, you really have not saved any work.
Finally, build a roof that can go through your structure. A roof or at least a cover for the top of your well will keep all the debris and everything else out. You want to keep your well clean and safe for your family to drink. If you do not know what is falling into it, you can not guarantee that you will keep your side of the bargain. That is why it is important to build a roof and a good one that will not let anything happen, similar to the roof of your own home.
You can choose to do something with wooden slats or with a roof complete with tiles. Either way, you must build a frame for the roof and attach it to your two bars on each side. Once you do that, you can add in your tile form. Make sure your roof is tilted to the sides to form a peak in the middle.
That will prevent something from entering the well and prevent your roof from building up and collapsing too much, which could also damage your well.
If you use wood slats, make sure it is done on the roof instead of going up and down.
That means that the pieces of wood will run in the same direction as the crossbar that you placed for the bucket. They should also overlap slightly from bottom to top to make sure that water and debris do not get stuck in crevices or creases. If you use tiles, you will want to do the same. Make sure it is well layered and that there are no gaps in the tiles. You will also want to put a special strip over the central peak so that nothing is left between the frame.
Using your well
If you want to use your well all the time you can do it. Going out to get another bucket of water can be difficult, but it will provide you with water that is only yours and that you know has no added chemicals or anything else that your city’s water probably has. Your family will stay much healthier and that will be the most important part. Also, you do not have to depend on anyone else for the water you drink or worry about what might happen in the future.
If you plan to use your well only in the event that something happens to the rest of society, be sure to check it periodically to make sure there is no problem with the roof or structure of the rest of your well. If there is one you want to fix it immediately. You definitely do not want something to happen where you do not have water and then discover that there is a problem with your well. If you know well in advance, you can fix the problem immediately, before it becomes a problem.
Preparing for a situation in which society could be missing and you could be alone will definitely be important. It is something that you should also keep in mind because there is no guarantee that everything will continue on the same path it has been.
Discovering how to dig your own well will be critical if something happens this way, so be sure you know what you are doing before it comes to that. You do not want to be trying to dig a well after everything breaks.
With these tips, you should be able to start on your own.
Of course, there are other ways to carry out the process and you can choose to drill or install a pumping system that brings water to your home or that is easier to lift from the ground, but this type of well will work. be the easiest thing to work with if everything collapses, since it requires absolutely nothing more than your own power, which is a good way to learn how to build a well and an excellent way to keep you and your family safe no matter what what.
DO IT YOURSELF