How to make a flint – from what to make a flint at home

How to make a tinder for flint
Before you make a flint, you need to take care of the availability of high-quality tinder. You can use for this: burnt dry rags, dried grass and moss, pine needles, birch bark, flax fibers, wooden sawdust, shavings, fluffed cotton or cotton, wax paper. Turt is easy to do with your own hands, both in nature and at home.

Ways of getting tinder in nature:

  • Pile pine, birch or oak bark, remove thin strips from the inside. From the birch you can remove the upper thin layer of birch bark. Also suitable for poplar bark.
  • Pick fluff from cattail.
  • Cut off tinder mushroom. Most of all, its middle part fits, the driest.
  • Thinly chop the bamboo shoot.

In order not to worry about finding a tinder during a hike, you can prepare it in advance at home.

Methods for making tinder at home:

  • Cut the cotton fabric into small square shreds, place them in an airtight container. To do this, a can can fit, covered with foil, in the center of which you need to make a small hole with a needle. Then you need to put the container on fire for about 5-10 minutes. When the smoke stops coming out of it, the container is removed from the heat, the foil is removed. Cotton charcoal must form inside.
  • Use the usual kitchen metal sponge. You just need to take her on a camping trip.
  • Collect dirt from the dryer. Cotton villi are easily set on fire if they are rolled into a stick for convenience.
  • Coat vaseline with cotton balls and place in an airtight container for storage.
  • Tear paper into thin fibers.

After preparing the tinder, place it in an airtight container and store it so that at any time it is needed, the tinder is dry.

What to do flint at home

What to do flint at home
Before you make a flint, you need to take care of the availability of high-quality tinder. You can use for this: burnt dry rags, dried grass and moss, pine needles, birch bark, flax fibers, wooden sawdust, shavings, fluffed cotton or cotton, wax paper. Turt is easy to do with your own hands, both in nature and at home.

Ways of getting tinder in nature:

  • Pile pine, birch or oak bark, remove thin strips from the inside. From the birch you can remove the upper thin layer of birch bark. Also suitable for poplar bark.
  • Pick fluff from cattail.
  • Cut off tinder mushroom. Most of all, its middle part fits, the driest.
  • Thinly chop the bamboo shoot.

In order not to worry about finding a tinder during a hike, you can prepare it in advance at home.

Methods for making tinder at home:

  • Cut the cotton fabric into small square shreds, place them in an airtight container. To do this, a can can fit, covered with foil, in the center of which you need to make a small hole with a needle. Then you need to put the container on fire for about 5-10 minutes. When the smoke stops coming out of it, the container is removed from the heat, the foil is removed. Cotton charcoal must form inside.
  • Use the usual kitchen metal sponge. You just need to take her on a camping trip.
  • Collect dirt from the dryer. Cotton villi are easily set on fire if they are rolled into a stick for convenience.
  • Coat vaseline with cotton balls and place in an airtight container for storage.
  • Tear paper into thin fibers.

After preparing the tinder, place it in an airtight container and store it so that at any time it is needed, the tinder is dry.

What to do flint at home

What to do flint at home
What can you make a flint yourself at home? There are different options:

 

  1. Saw a screwdriver in half, take one of its parts. On one side of the screwdriver a drill is cut, where pieces of silicon are placed (they can be bought), fixed on the superglue. Next, the surface is treated with sandpaper. For ease of use, a wooden handle is attached to the flint.
  2. You will need a file with one smooth side. A part is separated from it, the width is equal to four fingers. After cutting, the end parts of the file are ground. Flint is selected on a convenient size, as long as one edge is very sharp. Sparks are cut from the sharp edge of the flint by the smooth edge of the file.
  3. A simple way of a silicon wheel from a cigarette lighter and a wooden clothespin. The wheel is attached to the half of the clothespins on the screw. Instead of a clothespin, you can use a regular pencil that splits in half, and inside it is placed flint from a lighter. Then he reassembles and sharpens.
  4. Magnesium flint is used under all weather conditions. For its manufacture, a piece of magnesium is used, one side of which is soft, used for cutting chips, and the second contains a silicon or ferrotium rod for striking a spark. The principle of operation of the flint is very simple: magnesium shavings are cut from the soft side using the chair. Then, on the other hand, a spark is struck, igniting it. Magnesium chips will easily set fire to tinder or any other flammable material. The advantage of this type of flint is that magnesium chips burn in strong wind, precipitation, magnesium is not afraid of changes in temperature and humidity, and is not subject to deformation. Nothing is required for use except a sharp object for cutting a spark from a magnesium bar.

Like this post? Please share to your friends:
Leave a Reply

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: