How to make a spear out of paper and wood with your own hands?

The spear is the oldest tool for hunting animals and fish, as well as a means of self-defense. In the modern world, it can be used as a means for survival in the wild, so skills on how to make a spear can be useful to everyone. The simplest weapon can be made of a wooden stick, the tip of which is sharpened and burned on a fire. The spear consists of a shaft, a striking element (tip), and anchorage for a hand. How to make a spear with your own hands, you can find out further.

  • How to make a spear of wood
  • 2How to make a spear out of paper
  • 3How to make a paper spear: video

How to make a spear of wood

how to make a spearFor the flagpole, a tree is used, which can be found and cleaned with your own hands, or you can purchase a finished one. For the tip is used solid material – metal or stone. The simplest weapon does not have such an edge, it is wooden. A handhold is necessary so that the spear does not slip out of hand when used, however this is not a required element. Usually for fastening is used a strap made of cloth, leather or ordinary rope.

A wooden spear can be made in three versions: from a stick with a pointed end, from a stick with an iron tip attached to it, or from a handle with a point.

At home, it is very simple to make any of the above types. To make an ordinary wooden spear, you need a smooth branch of the desired length and diameter. The length must correspond to the height of a person or exceed him by a few centimeters. The optimum spear diameter is 2.5–3 cm. For making a spear, it is better to use strong woods – ash or oak, which should be cleaned and polished as much as possible. It is not recommended to use aspen for a pole because it is too soft, knotty and brittle. . When a suitable branch is found, its end is sharpened with an ax or a knife with movements from itself. If there is an opportunity, it is better to prepare the pole so that it is more durable: to do this, soak it in water and leave it to dry for about a month. Harden spearhead need over divorced fire, gradually turning it until it turns black. Do not be afraid that the spear will burn, the fire at the same time only dries the tree, making it more durable, solid and, at the same time, more light.

how to make a spear with your own handsFor the flagpole, a tree is used, which can be found and cleaned with your own hands, or you can purchase a finished one. For the tip is used solid material – metal or stone. The simplest weapon does not have such an edge, it is wooden. A handhold is necessary so that the spear does not slip out of hand when used, however this is not a required element. Usually for fastening is used a strap made of cloth, leather or ordinary rope.

A wooden spear can be made in three versions: from a stick with a pointed end, from a stick with an iron tip attached to it, or from a handle with a point.

At home, it is very simple to make any of the above types. To make an ordinary wooden spear, you need a smooth branch of the desired length and diameter. The length must correspond to the height of a person or exceed him by a few centimeters. The optimum spear diameter is 2.5–3 cm. For making a spear, it is better to use strong woods – ash or oak, which should be cleaned and polished as much as possible. It is not recommended to use aspen for a pole because it is too soft, knotty and brittle. . When a suitable branch is found, its end is sharpened with an ax or a knife with movements from itself. If there is an opportunity, it is better to prepare the pole so that it is more durable: to do this, soak it in water and leave it to dry for about a month. Harden spearhead need over divorced fire, gradually turning it until it turns black. Do not be afraid that the spear will burn, the fire at the same time only dries the tree, making it more durable, solid and, at the same time, more light.

The tips, which are attached to the gun separately, are more effective than just the pointed end of the stick. To make a spear with an iron tip, you need to find a dead tree, cut off a flat branch with a diameter of 2.5 cm. It is carefully trimmed, on the spot where the knife will be attached as the tip, is made or a bed half a branch deep. Often, the farm has a cutting from a shovel or other equipment, which can also be used as a tool pole. To attach the knife, use a rope or thin rope. To make it easier to wind the rope on the tip, you can attach one end to the tree, and wind the second around the stick, fixing the tip from the knife. It is necessary to do this, moving away for some distance, so that the rope will stretch and tightly wind around the spear. If necessary, you can make a second layer of winding.

To give greater strength to the tip, you can harden it on an open fire.
Often, in terms of survival, it is not possible to use the knife as a tip for a spear due to its absence or the performance of other functions. In this case, instead of a knife, you can use tin from a tin can or a sharp stone. It is better if it is flint. If there is a desire and opportunity, the tip can be made independently: for this you need to take a sheet of metal, put a sketch of the tip on it and cut it with a hacksaw. The length and width of the tip depends on the size of the spear.

Another type of spear is made of a stick and an acquired metal tip, which can be bought at a specialized shop (weapon). Often purchased ready-made tips are not sharp enough, so there will be no extra sharpening of the tip. In this case, you need to select a branch that is suitable for the diameter of the tip or sharpen it. The end of the stick, which will be put on the tip, must be narrowed for a more secure fit. In this case, you need to make sure that the gap between the stick and the tip is not too large, otherwise it will hang on it. If, however, it turned out that way, you need to make a hole with a drill on the tip and fix it on the stick with a nail.

How to make a spear out of paper

If you need to make a spear for role-playing games, you can use a simple way to make a spear out of paper. To make it, you need to do the following:

how to make a spear out of paper

  • Take a sheet of thick paper, fold it in half, then again in half.
  • Bend the fold, fold the corners of the paper inward to the center, then again, as in the manufacture of a paper airplane.
  • From the bottom edge of the paper you need to do the same, but fold the corners to the center only once.
  • The top edge again folds to the center. The bottom corners should be under the top, which are sealed with tape.
  • The shaft can also be made of paper by twisting several sheets of paper into a tube and taping them with tape, or you can use a thin stick like a wooden skewer. The shaft is inserted in the center of the paper tip, sealed with tape or glue.
  • To secure the paper tip with the base, at the same time decorating the junction between them, you can wrap a strip of colored paper around it with several turns, fix the end with glue or tape.
  • Thus, it is very simple to make a spear with your own hands for various purposes of use from any available materials under domestic or field conditions. It is not necessary to make each of its component parts, as the shaft and tips can be used in finished form, purchased specifically for these purposes or used again after other tools.

    Like this post? Please share to your friends:
    Leave a Reply

    ;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: