Oven-chipblock own hands: how to do?

Sometimes, it is vital to quickly warm up with a fire, without making a big fire, heat water or food without the cost of gas or with an acute shortage of firewood, sometimes you just need a hiking variant of the heating-cooking or campfire element. In this case, save the stove-chipbird, survival, or, in other words, the Bond stove. Such a device will become an assistant both on a hike and at a dacha to warm up a kettle or cook food without taking up much space when folded, and not requiring as much fuel as a gas burner.

  • Oven chipblock
  • 2Take a trickler with his own hands
    • 2.1The drum drum washing machine
    • 2.2Packing stand
    • 2.3 Baking, sliver from the banks
    • 2.4 Foldable design

Oven chipblock

oven chipblockSuch a construction is difficult to find on sale, unlike a burner, so the simplest way is to make a stove-furnace with your own hands. First of all, it is worth considering the advantages of this design:

  • Oven chipper – survival provides good traction. This suggests that any kind of fuel will be suitable for the rapid kindling of the stove, and you can get a maximum of thermal energy.
  • It can be safely ignited in places where it is forbidden to make open fire – after the kiln, there is no glowing embers and no flames coming out.
  • It will easily fit in a tourist backpack due to its compact size.
  • When extreme conditions occur in nature, you can use dry fuel or alcohol from the survival kit to rekindle the stove.

The design and design features of the stove-chisel stove are such that when assembling its skeleton of metal sheets, there are holes for air access below, and the air circulation and combustion temperature increase with the help of a raised bottom above the ground, not subject to its moisture. From above the walls of the stove are solid, protecting the fire from the wind. They are connected by bars or a metal grill on which to put the dishes or the kettle.

For the ignition of the turbo-furnace, the chippers use: chips, dry small firewood, twigs, brushwood, cones, wood bark, dry fuel, including sawdust in briquettes, alcohol.

To bake a chipblock the hands

To be completely confident in the quality of the manufactured stove, you can pre-outline the drawings of the future design. The stove can be made from scrap materials, there are several examples:

Oven from washing machine drum

to bake a shaker with his own handsSuch a construction is difficult to find on sale, unlike a burner, so the simplest way is to make a stove-furnace with your own hands. First of all, it is worth considering the advantages of this design:

  • Oven chipper – survival provides good traction. This suggests that any kind of fuel will be suitable for the rapid kindling of the stove, and you can get a maximum of thermal energy.
  • It can be safely ignited in places where it is forbidden to make open fire – after the kiln, there is no glowing embers and no flames coming out.
  • It will easily fit in a tourist backpack due to its compact size.
  • When extreme conditions occur in nature, you can use dry fuel or alcohol from the survival kit to rekindle the stove.

The design and design features of the stove-chisel stove are such that when assembling its skeleton of metal sheets, there are holes for air access below, and the air circulation and combustion temperature increase with the help of a raised bottom above the ground, not subject to its moisture. From above the walls of the stove are solid, protecting the fire from the wind. They are connected by bars or a metal grill on which to put the dishes or the kettle.

For the ignition of the turbo-furnace, the chippers use: chips, dry small firewood, twigs, brushwood, cones, wood bark, dry fuel, including sawdust in briquettes, alcohol.

To bake a chipblock the hands

To be completely confident in the quality of the manufactured stove, you can pre-outline the drawings of the future design. The stove can be made from scrap materials, there are several examples:

Oven from washing machine drum

With the help of the grinder, a piece of stainless metal is cut from an old washing machine that has outlived its life. You will need a strip of stainless steel 18-20 cm wide, which will determine the height of the stove. The length of the strip should be 65 cm, from it you need to twist the pipe. On the side, the structure is equipped with a hole with a door, which in the open position serves for laying firewood, and in the closed position, it directs all the heat to the top. Having departed 5 cm from the top, it is necessary to make holes for the skewers, and to provide the upper part with a grid for dishes. The bottom is equipped with a grate with three holes for the installation of pegs that fix the stove in one position.

Oven for cutlery stand

to bake a shaker with his own handsIn many hardware stores or departments that specialize in the sale of dishes, you can find round coasters for drying stainless steel tableware, provided with holes all over the surface. On the side of the product, it is necessary to mark the place of the cut with a marker for laying firewood inside the structure, then carefully cut out this place with a grinder. Four bolts with nuts are fastened to the bottom, which will serve as legs for the stove. You can make a grill of metal bars by pushing them through the upper holes.

Oven-chipblock from the jar

camp stoveIn many hardware stores or departments that specialize in the sale of dishes, you can find round coasters for drying stainless steel tableware, provided with holes all over the surface. On the side of the product, it is necessary to mark the place of the cut with a marker for laying firewood inside the structure, then carefully cut out this place with a grinder. Four bolts with nuts are fastened to the bottom, which will serve as legs for the stove. You can make a grill of metal bars by pushing them through the upper holes.

Oven-chipblock from the jar

The easiest option with the use of scrap materials – a trowel from a can. For the manufacture you will need a regular tin can, around the perimeter of which holes are made for air circulation. This miniature design is suitable for heating a mug of water with the use of chips or dry fuel.

Foldable design

turbo stoveThe turbo-furnace the chipper is made of metal sheets up to 1.5 mm thick. For this, a sketch of the future structure is prefabricated, then applied to the sheet from metal. On the sheet are cut holes for bolts, aligned edges. There should be five parts: four side parts and the bottom, as well as additional elements, such as the top stand for dishes, firebox, mounting for installation on the ground. To make the design easy to fold out, the side parts are fastened with furniture hinges. The bottom is fixed with hinges, and the firebox is supplied with a small bolt so that the door does not open spontaneously.

It is possible to improve the design, if you give it a pyramid shape – thus, it will become more stable, and from the bottom you can put more overall fuel. This will improve the thrust, and the fire will concentrate under the dishes due to the tapering top. As an improvised material, you can use unnecessary window or balcony casting. From it you need to cut four trapezium and one square. In the upper part of the trapezium, chimney holes are cut, and in one of them – a hole for the door. The square part is also drilled into a plurality of holes, then all elements are connected to each other by piano loops. A square grate is attached to one of the trapezes, and a door to the other. For greater convenience, before the manufacture of this design is necessary to make detailed drawings.

Like this post? Please share to your friends:
Leave a Reply

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: