Paracord Watch Band: How to Make Your Own

Paracord Watch Band: How to Make Your Own

Watches are much more than fashion accessories. While you can use a bright piece for an elegant event, a more practical approach benefits daily and outdoor life. For many outdoor enthusiasts, their paracord watch band is an indispensable part of their camping and hiking itinerary. These types of bands offer the user a series of fantastic options.

They are also really easy to do and, once you’re done, you’ll see how simple and elegant it can be. The key is to make sure that you are properly prepared in terms of supplies and step-by-step instructions. You may want to buy some extra paracord of Paracord Planet In case you want to do more than one.

What is the paracord?

Paracord refers to the type of cable that was initially used in World War II. The soldiers used this cord on their parachutes. The 550 cable is so called thanks to the weight it can hold. It has a breaking strength of 550 pounds, which, of course, is more than enough when it comes to the usual demands of watch bands.

Soldiers also used this cable for various uses overseas, such as shelter in buildings, tying items to their harnesses, and could even be split to make a rope for sewing.

Paracord Watch Band: How to Make Your Own

It is important to understand that there are differences in quality when comparing commercial and military grade Paracord, the latter being significantly stronger and more durable. That said, when you make wristbands for watches, you do not necessarily need all that strength.

The original 550 variety is only available in natural tones, while the commercial variety is also available in other colors. It’s important to understand the differences to make sure you’re really getting what you pay for! That said, when it comes to making watch bands, you do not necessarily need that total force of 550 pounds. A strong cable is excellent, but the price will also influence!

Benefits of this material.

For most enthusiasts of survival and nature, the paracord is an essential part of their supplies. If you are still not completely convinced, there are a number of great benefits to consider. First, the resistance of this cable is one of the most notable characteristics.

As mentioned above, a genuine paracord can hold up to 550 pounds. As strong as they are, they are also really durable. If the cable can be used again and again, just think how long a watch band made of this material can last!

Paracord Watch Band: How to Make Your Own

All this resistance and durability is included in a light package. A total of 225 paracord feet only weighs up to one pound! Which means that your watch band will also be incredibly light. We tend to come in contact with different outdoor elements when we venture outdoors. No need to worry about this watch band getting wet! It will dry fast and you will not have to worry about mold. Lastly, it also has a lot of other uses.

Other interesting uses

When you read the instructions to make a paracord watch band, you will surely find a lot of information. The paracord can be used as a frame from which to build a tent or hang a tarp. It can also be used as a wash line, for men, to secure items to your backpack, such as shoelaces and much more.

If you are in a difficult situation while in the desert, you can loosen the strap of your watch and use the cord to bow. Hunt and shoot your prey to stay fed until you find your way back to camp or back home.

Paracord Watch Band: How to Make Your Own

The cable is also useful for building traps. Use the cable to keep certain parts of the trap up or suspended and wait for your prey to approach. Because it handles water really well, you can even use this cable as a fishing line.

More than a watch band

Your watch band does not need to be anything other than a wrist feature. There are several ways to add some amazing features to this watch. First, to facilitate turning it on and off, you should use plastic clips. There is a wide variety of clips to choose from, depending on your needs and personal preferences.

Paracord Watch Band: How to Make Your Own

Some include a survival whistle, a small serrated blade, a compass and even a flint to light the fire easily! If you like one that does not include a compass, you can add a compass to the wrist band just as you would on the face of the watch.

Step by step guide

With the help of these detailed instructions of the paracord watch band, you can make your own watch bands, as well as bracelets and even other accessories if you wish! As practical as they are, these designs can also help you show your creative side!

Tools and supplies

Start by getting all the supplies you need and make sure all your tools work properly before you start. In many cases, you can even use kits that include all the supplies and possibly also some tools.

Will need:

  • Approximately 10 feet of paracord (may vary depending on the size of the doll and its binding technique)
  • A pair of scissors
  • A lighter
  • A tape measure
  • Hats
  • Clock
  • A 5/8 “side release buckle

Preparing

Start by measuring approximately 20 inches from one end of the paracord. At this point, it will go through one end of the side release buckle. Once the buckle is attached, the longest section will be your working end.

The shorter end (with the buckle attached) may not look as perfect to begin with, but all loose ends will be saved when you complete your design.

Adding the clock and measuring.

If you are making a band for your watch, you will need to thread the paracord threads from the loop of the buckle to the pin of the watch. Place the strands over the watch pin, under the watch, and then over the next watch pin. Pass the cord around the buckle at the other end (do this twice). Now you will need to measure your wrist. The length should be equal to the circumference of your wrist, since the knitting process will stretch the length and this will make it the perfect fit (not too tight or too loose).

Paracord Watch Band: How to Make Your Own

Remember not to include the buckle section in your measurements, since this is the part that is hooked in the other half of the buckle. Pass the wires back from the back to the wrist pins, under the watch and back to the other end of the buckle. This establishes the basis for weaving the rest of the cable into the final product.

Weaving

Now is the time to start knitting. Start at the long end of the paracord and move towards the shorter end. Place your cable on the external cable, under the two central cables and on the other external cable. Now roll it back over the two central cords and go around them.

Paracord Watch Band: How to Make Your Own

Continue in this manner until you reach the pins of the clocks. Remember that you should always keep the fabric uniform and tight. Do not leave too much slack or you will not achieve the desired effect.

Thread the watch

Once you get to the clock, you must make sure it is centered. Push the watch against the woven cord. Now bring the end of your working strand through the pin and to the other side of the watch. If you are making a bracelet, you will not have to worry about threading the watch.

Paracord Watch Band: How to Make Your Own

You will continue to knit until you reach the other end.

Other side

Continue weaving along the other clip. This time, be sure to keep your work woven against the watch while working towards the clip. When you approach the end with the buckle, you will find that pair of hemostats extremely useful! They do the light work of those last few tissues.

Last retouches

Finally, take your working strand and wrap it around the outer cord. The working thread will reach the bottom of the watch band. Now, you have to try it for the size. Make sure it is not too big or small. If necessary, make it tighter or looser according to your needs.

Paracord Watch Band: How to Make Your Own

Now use your pair of hemostats to work three of the central tissues near the end of the buckle. Use the hemostats to grab the working strand and pull it back through these central tissues.

Now use your scissors to cut the loose end and use the lighter to melt the tip. This will help prevent the end from fraying and the cable breaking. Tuck the end under the fabric and repeat these steps with the shorter end of the cord. Now you are ready and ready to use your new watch!

Creative options

Remember that these designs are only limited by your imagination. The commercial degree of paracord is available in many different colors. In fact, these watch bands can be made specifically for men, women, boys and girls! There are even some types of paracord that are already multicolored (like black and yellow or red and black). You can even use two different colors and mix it a bit yourself! The key is to always keep in mind the interests and preferences of the user.

Paracord Watch Band: How to Make Your Own

You should also consider the practicality of the colors. For example, black and brown do not show dirt as much as lighter colors. If you plan to use this watch during normal outdoor adventures, you may want to opt for darker shades. If you’re making a fun piece for occasional use, then lighter colors are not all bad.

They can also be cleaned quickly and easily. Using a mild soap and an old toothbrush, that dirt has no chance! Just remember to let the strap of your watch dry completely before you use it again. This will ensure maximum comfort.

Compared with other materials

The watch bands come in a wide variety of materials, and each of them has its own list of advantages and disadvantages. Metal watch bands are usually the heaviest of all. Along with weighing the arm down, they also tend to make your skin quite warm and sweaty. The metal tends to scratch and does not resist well against water. The rubber is very light, but it can become really uncomfortable after a relatively short period of time, since they really make you sweat.

Paracord Watch Band: How to Make Your Own

Leather is attractive and elegant, but it does not necessarily stand the test of time. It wears out and can be quite sensitive to elements like sun and water. Paracord is light, strong and holds very well, no matter how drenched it is.

You do not have to worry about the small pieces falling off (like the synthetic leather bands) or the watch and watch band separating when the seam fails. This makes the paracord bands much more durable and desirable.

The perfect fit for anyone.

These watch bands are suitable for each and every one. You do not have to be a person outdoors to love them. In fact, you can even use more than one color in your design to get a fun result. Once you have made your first watchband, try to show it a little and see who shows interest. In this way, you will know who would like one as a gift!

They are great for all occasions and, although you do not celebrate anything in particular, you can also give them to your loved ones just because! Feel free to customize your designs by adding charms and trinkets too! Dog tags are an example of a popular accessory. You can have your name, your initials or a significant date on the label before attaching it.

DO IT YOURSELF

Like this post? Please share to your friends:
Leave a Reply

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!:

SQL - 51 | 0.925 сек. | 6.22 МБ