Sail on a PVC boat do it yourself: how to do?

Almost every amateur angler or professional has a PVC boat. It is easy to control it on lakes with calm water, but on reservoirs with a more or less strong current there is a need to fix the boat in one position so that it does not turn from the wind and waves. For this purpose, anchor-sails are used, which direct the boat with the flow at the same speed as it, so that it does not carry the rig out of it. Making such a sail with your own hands is easy; such a device will help increase the efficiency of fishing, giving you the opportunity to enjoy the process, without being distracted by attempts to pacify the craft. The main advantage of using water sails is that hands are exempt from oars, therefore, do not get tired of constant rowing.

  • Water anchor sail with your own hands
  • 2Sails do-it-yourself fabric
  • 3Pail with your own hands

Water anchor sail with your own hands

do-it-yourself sailA water sail is a product in the form of a cone or pyramid with an open base. The base consists of a metal hoop or crosspiece, four slings are attached to it for attachment to the anchor rope. The anchor is pulled by a retractable cable attached to the top of the sail. The anchor-sail has a special buoy for lowering and lifting the structure into the water, as well as determining its location in the water.

Modern water sails have two main functions: the first is to help the raft, yacht or boat stay afloat and not roll over from the waves and wind, and the second is to slow the drift of the craft. When making a sail on a PVC boat with your own hands, it should be borne in mind that the length of the anchor cable must correspond to the wave period and be at least five lengths of the small size vessel. For its manufacture is used nylon, twisted in three strands.

The length of the anchor-sail should be from two to four meters, these dimensions depend on the size of the PVC boat.
The diameter of the sailing dome is about 120-150 cm, in its center there must be a hole for the entrance of water, the diameter of which can be adjusted using a cord. Slings allow you to adjust the speed of the boats. The material from which the sail is made, directly affects its service life. It can be made of thick polyethylene or thick water-repellent fabric. The effectiveness of the water sail depends on the length of the anchor cable – the longer it is, the more effective its use. Correct with a sailing length of 1.5 meters, the rope is considered to be 10 meters long. A load is attached to the bottom of the anchor.

Sail DIY Fabric

Sail with a clothA water sail is a product in the form of a cone or pyramid with an open base. The base consists of a metal hoop or crosspiece, four slings are attached to it for attachment to the anchor rope. The anchor is pulled by a retractable cable attached to the top of the sail. The anchor-sail has a special buoy for lowering and lifting the structure into the water, as well as determining its location in the water.

Modern water sails have two main functions: the first is to help the raft, yacht or boat stay afloat and not roll over from the waves and wind, and the second is to slow the drift of the craft. When making a sail on a PVC boat with your own hands, it should be borne in mind that the length of the anchor cable must correspond to the wave period and be at least five lengths of the small size vessel. For its manufacture is used nylon, twisted in three strands.

The length of the anchor-sail should be from two to four meters, these dimensions depend on the size of the PVC boat.
The diameter of the sailing dome is about 120-150 cm, in its center there must be a hole for the entrance of water, the diameter of which can be adjusted using a cord. Slings allow you to adjust the speed of the boats. The material from which the sail is made, directly affects its service life. It can be made of thick polyethylene or thick water-repellent fabric. The effectiveness of the water sail depends on the length of the anchor cable – the longer it is, the more effective its use. Correct with a sailing length of 1.5 meters, the rope is considered to be 10 meters long. A load is attached to the bottom of the anchor.

Sail DIY Fabric

Sails made of cloth with their own hands are made quite simply. For the manufacture of a sailing dome, you must take a canvas or nylon fabric, raincoat size of 1.5 by 2 meters. To get an even dome, it is folded in four, a curve is drawn from the upper end, then an incision is made along this line. The result will be four dome-shaped segments that need to be stitched together. To get the dome of the correct form, it is recommended to pre-manufacture the paper blanks sailing anchor. To do this, you can use any graphic program editor to then print and cut the drawing of the main part of the water sail, or you can make it out of paper with your own hands with the help of drawing accessories.

A strip is sewn along the bottom edge of the resulting dome, into which a nylon cord is inserted. Its length can be adjusted, thereby reducing or increasing the diameter of the water sail ring. But it is best to use a frame for a ring of metal. To do this, you need a ring of wire with a diameter of 6-8 mm or a regular, sporty aluminum hoop. The size of the hoop will allow the boat made of PVC to stay afloat and ensure its optimum speed while fishing.

The wire or hoop ring is covered with a tarpaulin or nylon cloth so that no sagging is formed. The diameter of the circle should be divided into three equal parts, to these sections to tie the slings of a meter length, which are connected by ends together. A five-liter plastic bottle must be tied to the upper part of the water sail from the cloth, and a small load to the lower part. Thanks to this design, the anchor will keep the stream, and remain afloat in an upright position. However, if the weather is too windy, the five-liter tank needs to be replaced by a half-liter, so that the anchor goes under water a little and does not inflate over it. Then he will allow to steadily keep the course of the ship with the flow.

how to make a sail with your own handsIf the boat is small, you can use a smaller circle instead of a hoop, for example, make it from thin branches. They are firmly connected with each other, the cargo is tied to the formed ring. Plastic bottle is not needed, because the branches are already beautifully kept on the water. Of course, the anchor from the branches is inferior in functionality to the hoop, covered with cloth, but it copes well with its task, especially when there are no other materials at hand to make it. The setting of the sail is as follows: the anchor cable is being straightened, the sail is lowered into the water, allowing it to sail at a distance of no more than 10 meters from the boat (the optimal distance is 6-7 meters). The rope is tied to the bow of the boat. When she pulls from the current, the boat will be directed strictly in the wind, and the anchor will not allow her to wag from side to side.

The second way to make a sail out of cloth is the following:

  • The canvas of canvas or nylon fabric in the form of a rectangle is attached by one edge to the wooden fence.
  • The reinforcement bar is sewn into the lower part of the web.
  • To enhance the buoyancy of the sail, three foam foam bars are attached to the picket fence on the screws.
  • All four sides of the water sail are connected by nylon ropes, tied in one knot. They are tied with a rope that connects the sail with the boat.
  • A 15 cm diameter hole is made in the center of the sailing canvas to allow water to pass through it, ensuring the smooth running of the craft.

When the sail is lowered into the water, it is straightened under the pressure of water, occupying a vertical position, and follows the boat in the straightened form.

Sail your own hands

how to make a sail with your own handsIf the boat is small, you can use a smaller circle instead of a hoop, for example, make it from thin branches. They are firmly connected with each other, the cargo is tied to the formed ring. Plastic bottle is not needed, because the branches are already beautifully kept on the water. Of course, the anchor from the branches is inferior in functionality to the hoop, covered with cloth, but it copes well with its task, especially when there are no other materials at hand to make it. The setting of the sail is as follows: the anchor cable is being straightened, the sail is lowered into the water, allowing it to sail at a distance of no more than 10 meters from the boat (the optimal distance is 6-7 meters). The rope is tied to the bow of the boat. When she pulls from the current, the boat will be directed strictly in the wind, and the anchor will not allow her to wag from side to side.

The second way to make a sail out of cloth is the following:

  • The canvas of canvas or nylon fabric in the form of a rectangle is attached by one edge to the wooden fence.
  • The reinforcement bar is sewn into the lower part of the web.
  • To enhance the buoyancy of the sail, three foam foam bars are attached to the picket fence on the screws.
  • All four sides of the water sail are connected by nylon ropes, tied in one knot. They are tied with a rope that connects the sail with the boat.
  • A 15 cm diameter hole is made in the center of the sailing canvas to allow water to pass through it, ensuring the smooth running of the craft.

When the sail is lowered into the water, it is straightened under the pressure of water, occupying a vertical position, and follows the boat in the straightened form.

Sail your own hands

In addition to the fact that you can make an underwater sail to reduce the drift speed and impart stability to the ship on the water, you can make an ordinary sail for a PVC boat to be able to pass through water bodies where the operation of motorized vessels is prohibited, as well as increase the speed of the boat. Before you make a sail, it is very important to correctly calculate the sail area in accordance with the size of the vessel, taking into account the height of the surface of an inflatable boat. To increase the rigidity of the hull and evenly distribute the load on its bottom, a support is made of dural aluminum tubes, which can be obtained by disassembling a sports hoop. In the longitudinal direction, they are fixed with ski poles, more precisely, with their tubes. A piece of pipe is attached to the resulting support, the mast support is attached to a ring of a pipe with a diameter of 40 mm.

The mast is made of pieces of duralumin pipe, for easy transportation, they are disassembled. Its length is about 2.5 meters. Guys and shtaga attached to the top of the mast, to the yoke of twisted wire. They are made of synthetic ropes. Under the handles at the ends of the cylinders, which serve to carry the boat, lay a board with a hole for the puller, on which the steering wheel is mounted. The upper part of the steering wheel is made of two strips, and between them is a reclining steering feather. This feather is fixed on a special bracket. The control of the sail is carried out with the help of a hedgehog, which is passed through a block mounted on the steering bracket. When the skeleton for stretching the sail is ready, you can begin to manufacture the fabric base.

For the manufacture of sails using linen fabric (canvas), cotton fabrics (avisent, filter cloth, etc.), as well as fabrics used for the manufacture of tents – raincoats, awning fabrics, film sheets. The main requirement for sailing fabric – it should be light, but water and airtight and dense. In addition, it should not stretch from the load and should have a smooth surface. Since a special fabric for sails is difficult to acquire, and ordinary linen or cotton cloths do not have the above qualities to a sufficient degree, you can use special impregnation for them from a solution of PVC resin and acetone in the ratio of 50 grams to 0.5 liters.

For a beginner, the process of making sails for an inflatable boat may seem difficult, but you can always watch the video, use the recommendations and practical advice of a person who made such a device found on the Internet.

Like this post? Please share to your friends:
Leave a Reply

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: