Scarecrows for hunting with their own hands: types and instructions for their manufacture

Despite the fact that today in specialized stores you can easily buy any goods for hunting, many craftsmen prefer to make stuffed animals for hunting with their own hands. This allows not only to save money, but also to create such accessories that fully meet the requirements of an experienced hunter.

  • What are we need stuffed?
  • 2Manufacturing Technology Requirements
  • 3What materials are used in the manufacture of
    • 3.1 Of plywood
    • 3.2Volume stuffed foam
    • 3.3 Stuffed foam

What are we need stuffed?

For a start, let’s see why they are needed at all. In fact, everything is quite simple. When a hunter sits in an ambush, waiting for a duck or a goose, he is usually tied to one place – for example, a small lake where the bird flies to sleep after a day’s feeding. However, what if there are many such bodies of water in the area? After all, the duck can choose to spend the night any of them. That scarecrow helps the bird to make the “right” choice. After seeing several of their relatives on the water, they understand that this reservoir is completely safe and rush to it.

Stuffed animals are especially useful during spring hunting. At this time, you can only hunt drakes. However, to determine in flight, and even at dusk, whether a drake or a duck flies on a hunter is simply impossible. It is quite another thing when they land ten to fifteen meters and begin to swim slowly. Moreover, it is much easier to get along an almost motionless bird sitting at such a small distance than flying in the sky, at a height of 20-40 meters.

Therefore, any fan of such a hobby should learn how to make a stuffed duck for hunting with his own hands – it will allow him to return home every time with rich trophies.

Requirements for manufacturing technology

What qualities should ready stuffed animals possess? There are a lot of them. First and foremost, and this is completely understandable, they should look like ducks. Ideally, at dusk, even the hunter himself should not at first sight distinguish where the dummy swims, and where the live duck stops for a few seconds. If the imitation is not sufficiently plausible, then there is always a risk that the duck will not believe that its brothers are resting on the water.

At the same time, they should also be light. Still, sometimes the hunter has to walk a few kilograms from the left car to the hunting spot. Excess weight will cause serious discomfort, leading to the fact that fatigue poured more quickly than it could.

Based on these requirements, it is worth choosing materials suitable for manufacturing, so that ready-made stuffed geese for hunting with their own hands would be natural and light.

stuffed duck hunting

What materials are used in the manufacture

Experienced hunters use a variety of materials to create stuffed animals, fully consistent with their ideas about the best option. We list the most popular options, and also tell you about the technology of making duck scarecrows for hunting with your own hands.

Plywood

Perhaps it is from plywood making the stuffed geese for hunting with their own hands takes the least time. Even a teenager who can work with the simplest tools will cope with this task.

However, they are also the least durable. Being in contact with water, plywood absorbs moisture, which makes it necessary to thoroughly dry the stuffed animals after each hunt. But even in this case, they are usually enough for only a few seasons. If you forget to dry, then the effigies will start to rot rather quickly, will be covered with mold – you will have to make new ones.

So, for work you will need:

  • plywood;
  • a simple pencil or pen;
  • sandpaper;
  • hacksaw with fine teeth;
  • linseed oil
  • oil paints,
  • brush,
  • several bars with a section of about 2 centimeters and a length of 20-25 cm,
  • petrol.

When all materials and tools are at hand – you can get to work:

  1. First, draw a few duck silhouettes on the plywood with a pencil. It is desirable that they be different – one neck is elongated, the other on the contrary, has cackled, the third swims relaxed in clear water in complete safety.
  2. Using a hacksaw, carefully cut out the finished figures.
  3. Treat the edges with sandpaper so that they are smooth and do not slip a hand when working with them.
  4. Cover the plywood with hot linseed oil and let it dry.
  5. Paint the effigies with oil paints – try to give them the most believable look.
  6. The paint will glisten noticeably after it dries. To remove shine, wipe the stuffed rag lightly moistened with gasoline.
  7. Attach the prepared pegs to the stuffed animals. You can make them removable so that the finished products take up less space during transportation.

Well that’s all. Now you know how to make stuffed ducks for hunting with your own hands, using only plywood and some other materials.

Chuchkla from plywood

What materials are used in the manufacture

Experienced hunters use a variety of materials to create stuffed animals, fully consistent with their ideas about the best option. We list the most popular options, and also tell you about the technology of making duck scarecrows for hunting with your own hands.

Plywood

Perhaps it is from plywood making the stuffed geese for hunting with their own hands takes the least time. Even a teenager who can work with the simplest tools will cope with this task.

However, they are also the least durable. Being in contact with water, plywood absorbs moisture, which makes it necessary to thoroughly dry the stuffed animals after each hunt. But even in this case, they are usually enough for only a few seasons. If you forget to dry, then the effigies will start to rot rather quickly, will be covered with mold – you will have to make new ones.

So, for work you will need:

  • plywood;
  • a simple pencil or pen;
  • sandpaper;
  • hacksaw with fine teeth;
  • linseed oil
  • oil paints,
  • brush,
  • several bars with a section of about 2 centimeters and a length of 20-25 cm,
  • petrol.

When all materials and tools are at hand – you can get to work:

  1. First, draw a few duck silhouettes on the plywood with a pencil. It is desirable that they be different – one neck is elongated, the other on the contrary, has cackled, the third swims relaxed in clear water in complete safety.
  2. Using a hacksaw, carefully cut out the finished figures.
  3. Treat the edges with sandpaper so that they are smooth and do not slip a hand when working with them.
  4. Cover the plywood with hot linseed oil and let it dry.
  5. Paint the effigies with oil paints – try to give them the most believable look.
  6. The paint will glisten noticeably after it dries. To remove shine, wipe the stuffed rag lightly moistened with gasoline.
  7. Attach the prepared pegs to the stuffed animals. You can make them removable so that the finished products take up less space during transportation.

Well that’s all. Now you know how to make stuffed ducks for hunting with your own hands, using only plywood and some other materials.

Bulk stuffed foam

These products can boast not only surprisingly low weight (the finished stuffed animal weighs only a few tens of grams), but also realistic – because using foam, you can make bulk stuffed geese for hunting with your own hands. Therefore, they are often much more efficient than analogues of plywood.

However, if there is an opportunity, then it is better to use not polyfoam, but expanded polystyrene. It is slightly heavier, but much stronger, and it is almost as simple in processing. Consequently, stuffed animals will be able to serve more than one year.

stuffed foamSo, before you start work, stock up on the following tools and materials:

  • office cutter,
  • sandpaper,
  • pencil,
  • tassels,
  • polystyrene or polystyrene foam (the main thing is to be strong enough and not less than 2-3 cm thick),
  • putty,
  • acrylic paints,
  • glue.

Do not use nitro glue – if it gets onto the foam it will burn holes in it, spoiling the appearance of the stuffed animals, and also complicating the work.

Most of the list is in any apartment. Well, what is missing is always available at any hardware store. After that, you can safely get to work.

  1. Apply to the foam silhouette ducks. It is better to do it first on the cardboard, and then transfer it to the foam, having made two identical blanks. Make sure that the size and proportion as much as possible resemble a real duck.
  2. Draw separate profiles for the wings – also two pieces.
  3. Cut out foam blanks. It is best to use a hacksaw for metal, but you can do with the stationery cutter.
  4. Glue all four pieces together.
  5. Go through fine sandpaper to remove all irregularities, give the effigy more roundness and realism.
  6. Putty joints to keep the surface as flat as possible, let the putty dry.
  7. Using a brush and acrylic paint, paint the effigy in the appropriate colors.

Well that’s all. The scarecrow is ready and can go hunting! You can fix a load in the lower part – for example, a massive bolt so that the effigy will not accidentally be knocked over by the wind.

Scarecrow from foam

Preparation for manufacturing is quite complicated, but the process of creating stuffed animals itself is simple – this option should be chosen by those who want to make a large number of imitations at once. For example, if you are interested in a stuffed crow for hunting with your own hands, such a solution would be the best.

stuffed duckSo, before you start work, stock up on the following tools and materials:

  • office cutter,
  • sandpaper,
  • pencil,
  • tassels,
  • polystyrene or polystyrene foam (the main thing is to be strong enough and not less than 2-3 cm thick),
  • putty,
  • acrylic paints,
  • glue.

Do not use nitro glue – if it gets onto the foam it will burn holes in it, spoiling the appearance of the stuffed animals, and also complicating the work.

Most of the list is in any apartment. Well, what is missing is always available at any hardware store. After that, you can safely get to work.

  1. Apply to the foam silhouette ducks. It is better to do it first on the cardboard, and then transfer it to the foam, having made two identical blanks. Make sure that the size and proportion as much as possible resemble a real duck.
  2. Draw separate profiles for the wings – also two pieces.
  3. Cut out foam blanks. It is best to use a hacksaw for metal, but you can do with the stationery cutter.
  4. Glue all four pieces together.
  5. Go through fine sandpaper to remove all irregularities, give the effigy more roundness and realism.
  6. Putty joints to keep the surface as flat as possible, let the putty dry.
  7. Using a brush and acrylic paint, paint the effigy in the appropriate colors.

Well that’s all. The scarecrow is ready and can go hunting! You can fix a load in the lower part – for example, a massive bolt so that the effigy will not accidentally be knocked over by the wind.

Scarecrow from foam

Preparation for manufacturing is quite complicated, but the process of creating stuffed animals itself is simple – this option should be chosen by those who want to make a large number of imitations at once. For example, if you are interested in a stuffed crow for hunting with your own hands, such a solution would be the best.

For work, take:

  • alabaster,
  • polyurethane foam
  • Fiberboard,
  • boards,
  • hammer,
  • nails
  • hacksaw,
  • solid foam
  • stationery knife,
  • sandpaper.

Now you can start making a stuffed drake of a duck for hunting with your own hands:

  1. Make one stuffed animal out of foam plastic – it is possible from a single piece, or according to the instructions given above. Try especially when working – all subsequent stuffed animals will be an exact copy of the first.
  2. Dissolve the plaster or alabaster in a suitable container. It should be quite liquid – just like sour cream. Press the foam plastic blank into it, sideways, exactly half. Allow the plaster to harden – usually it takes a maximum of the night.
  3. Lubricate the hardened surface with vegetable oil and pour another portion of gypsum. When it hardens, you can gently separate the two halves and extract the foam blank from them.
  4. Fold the two plaster halves and carefully make a small hole at the bottom – 2-3 centimeters.
  5. Pour the foam into the mold through the hole and let it solidify.
  6. Disassemble the form, remove the future effigy and color it carefully.

That’s all. Now you have the opportunity to prepare any number of stuffed ducks, geese or crows from the foam. As in the case of polyfoam, you can weight the bottom with some weight to make the effigy more stable.

Like this post? Please share to your friends:
Leave a Reply

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: