A river is defined as a course of water that flows naturally and is unidirectional and in a continuous state of physical change over time. Due to the nature of rivers, streams and streams, the strategies required to fish successfully within them can be more technical taking into account the current and the flows, both in general and in certain areas of the river, for example. Banks versus riverbeds, hooks are more likely due to fallen trees and logs and because the current is in constant motion.
This means that more precision is required at launch, but minor modifications are always required depending on the conditions at the time.
With all this to consider, and more, below is a guide to the best fishing tips in rivers to increase your chances of catching fish in rivers, streams and streams.
River fishing equipment
Depending on what you are fishing for, you can determine to a large extent what specialized equipment you may need.
However, in general, the following equipment is enough to fish and catch fish:
- This may depend on the weight you want to hold and work when you use a pump and reel technique for recovery. Another important factor to keep in mind is that lighter bars will make pitting easier than heavier bars. It is also more pleasant to use lighter equipment.
- This will also increase the weight of the rod you are holding, so consider what you can work with, but if you are going to play for larger games, you can break rods and reels if they are not designed for it. Another useful tool if you plan to leave your rod in a stand in the boat instead of holding it all the time, you can get reels that make a lot of noise when a fish is primed.
- In general, for fishing in the river you want something lighter, since fish in rivers and streams are smaller than those in lakes and dams, however, a larger target fish will require a stronger line. A lighter line also reduces visibility in the water, which is another consideration so as not to scare your fish from their bait.
- Hands. Avoid too small hooks or anything that may get stuck in the fish’s throat, since it is more likely to be killed by the removal. The wide-gap hooks are more likely to catch in the fish’s mouth. And make sure it’s sharp and not boring. If you plan to catch and release, you can use hooks without bars, which will reduce more injuries and traumas in the fish.
- Lures, flies and / or baits. This will depend to a large extent on where you are fishing for what you will be using. It is better to use local baits or decoys that resemble local prey, otherwise it is possible that the fish you are targeting does not recognize it.
- Useful for fishing in smaller streams and rivers when you’re not on a boat and if you do not want to get wet.
- It lets you see when you’re getting bites because it will submerge below the surface, so they’re bright colors so you can see them from afar.
- As the rivers flow, only the bait and line will not be heavy enough to keep your bait near the bottom of the river where fish are likely to be, so a sinker will help guide the end of your line there.
- Sometimes you will not be able to take out a hook with your fingers and your hands and, at some point, you may even need them to remove the hooks.
- Cutting line. Unfortunately, it is more than likely that you have trouble fishing in the river with all the fallen logs, trees and rocks, and sometimes you simply can not get your line for free, so you will have to cut it.
- To keep everything more extras inside.
Profile of the river
Fishing in a river may not seem very different from fishing in other bodies of water; However, there are different considerations to consider.
In the ocean, water can be much deeper and different water levels can have different currents. If you fish on the beach, there are backward and forward movements of the movement of the waves. In contrast, fishing in the lake or dam will have little movement of water to consider.
River fishing has more movement than fishing in lake or dam, but unlike fishing in the ocean, the movement of water is unidirectional.
Depending on depth, width and other geological features, the flow velocity may change as the river advances. Narrow points will cause a bottleneck by increasing the river’s energy, while larger areas can reduce the river’s energy. If the river runs directly through the landscape, it can increase speed compared to a river that turns and turns, which will face more obstacles and, ultimately, reduce its flow.
Rocks, falls and elevations in the landscape can also change the action of water, making it more turbulent or the lack of these features can make the river run more calmly. This creates many micro-habitats within the fluvial system.
Putting it all together
Working the flow and turbulence of a river will give you an understanding of the pattern and behavior that is important to determine where the greatest concentrations of fish are likely to be found, especially if you are targeting a specific species. Each river is different and so is each species of fish in its preference. Living in a river environment means that the habitat has a lot of energy, so the speed and duration that a species can maintain determines where it is likely to find that fish in its environment.
Finding the fish
Rest areas and hiding place.
As fish move constantly in response to their environment, this means spending a large amount of energy. Therefore, in general terms, fish tend to be found in the quieter and slower moving water areas, since they require less effort. The fish will congregate around areas of plants and weeds, banks, the bottom of the river or other formations that slow down the flow of water, such as islands, sunken trunks and backwaters, where currents converge, whirlpools and eddies.
In general, fish will only leave these slow-moving currents so that higher-energy streams change location or feed. Therefore, when we consider this, we can deduce that targeting areas such as weeds and dense plants, throwing near the bank or bouncing its bait along the bottom of the river is likely to result in higher catch rates.
You can also choose the fish that are being fed. Often, food accumulates in patches of foam, which are usually found around submerged rocks and trees, and trunks. A large amount of food also goes through landfills in larger rivers, so some fish will be collected here to catch the food before it moves. It also pays attention to the birds that feed on the river. They can float over areas of bait fish, which in turn also attract larger game fish, so it can give you a good idea of where to launch.
It is good to know the behavior of the feeding habits of the target fish, for example, how far it is likely to travel to feed, or where it is likely to feed, as this will determine the best strategy and techniques to employ.
Climate is also another factor to consider when locating fish. When it rains, water droplets can trap insects in the air and let them fall on the surface of the water. Some fish use this to their advantage as they approach the surface to feed. Raindrops on the surface of the river also break what the fish can see over the water, so they are less likely to see you too.
During the warmer weather, the fish will be much slower and slower, so when you find them, you will have to reduce the speed of your fishing technique so that the fish are more interested. Windy weather can allow you to throw more so that you can cover more area, therefore increasing your chances of catching a fish.
Looking and polarized sunglasses.
Another way to find fish is to look for them yourself. This is easier to do in clear water without much sediment loading, so it is usually easier to see in the water of less turbulent and calmer rivers, as well as in shallower rivers.
However, a pair of polarized sunglasses can help, since they will reduce the brightness of the water on sunny days and allow you to see through the water, as long as you are not collecting too much sediment. But it will allow you to see deeper and more clearly in the water. This can greatly reduce the search time, however, be careful not to get too close to annoy or scare.
Fishing techniques to be employed.
There are several techniques that can be used when fishing in rivers.
This is one of the best methods to fish in rivers and streams, as it allows you to cover as much area. It is about throwing up, usually pointing to the bank or where the flow can be slower and let the current take the bait down.
This is a technique that is not only for individual pitches, however, it implies the use of the same technique several times with slight modifications in the throw distance and the distance recovered until you have completely covered the area you are fishing.
This is the most beneficial technique when the fish do not leave the areas of slow flow to feed, but they look on their backs and wait for the current to take their food. This also means that the fish do not see you, as they will have their backs to you. Once again, place the line upstream in line with an area where you think the fish are, it could be the bank or a collection of boulders or fallen trees in the middle of the river and retrieve them as the line advances towards you.
Fishing down the river
This is the least favorable for fishing in the river, since it is more likely that the fish will see it and is more likely to bother them. Also, if the current is heavier, you will need a heavier weight to keep the bait near the bottom of the river, but this in turn will make it more likely that your line will snag. To launch downstream, you actually do it slightly, keep the end of the rod low and recover once your line is directly downstream.
Some fish become more active when the turbulence of the water agitates many sediments. These murky conditions mean that some fish lower their guard due to low visibility conditions and are less likely to remain hidden where they can not be found.
In addition, when the sediment is stirred at the bottom of the river, many small crustaceans and other bait-type species that live in the sediment can be extracted, so if you can detect these species near the surface, more likely in more low, The larger fish are usually not far away. With the increased turbulence of the river, it can also point to areas where the stream will deposit bait species, such as where a small stream empties into the main river.
Talk to the locals, either with other people who fish in the area, find information on the forums or talk to the bait and approach the owner of the store when picking up the local bait for the area. These are the people who will be well educated in the river or stream in which they want to fish and can offer you the best advice on the time of day or the lunar cycle, where are the best locations along the river, what are the better climatic conditions. They are for the fish in that river and other similar advice.
Winter is a difficult time for all species and when things start to freeze due to food, they can become scarce. Rivers depend to a large extent on terrestrial nutrients as the basis of their food chains. During the winter, when the river and the landscape freeze, this can cut off the main resources for the river’s ecosystem. Therefore, fish under the ice can be very hungry, so ice fishing in very cold climates can be quite abundant.
However, once again, you need to know where to find the fish. The same rules apply; little current, food, etc., but you must know before leaving because everything will be under ice, so you will not be able to see it once you are there.
Urban and urban fluvial fishing.
River fishing can sometimes have a bad reputation when it comes to water quality, especially in urban areas. Pollution is more likely in these areas due to stormwater runoff. In these cases, you should always consult with the advisors and local and state agencies if you want to consume what you catch, otherwise, it is perfectly fine for recreational fishing, but it may not catch much depending on water pollution and resistance or water resistance. Species that occupy it.
Also keep in mind that in some areas certain species are considered pests and you may not be allowed to return them.
Some rivers, while not in urban areas, may be affected by humans in other ways, such as by regulating river flow through locks, dams and dams. These devices that slow down, stop and regulate the flow of water and what happens can greatly change the entire structure of the food chain within the river ecosystem. These regulatory structures change the depth and temperature of the water and the reduced flow means that the fish are more likely to congregate around them.
Keeping your catch
If you plan to keep your catch, be sure to check with local or state authorities about the size and regulations of catch limits, as well as any specific rules for individual special offers. Also make sure you get the necessary licenses before your trip. It is also advisable to be up-to-date with codes of conduct for ethical treatment to reduce stress and trauma for fish, as well as to know the most humane methods of killing the species you wish to capture for food.
Remember to take only what you need, instead of always trying to meet your limits, this will avoid any unnecessary waste and will guarantee future populations of fish in the river.
When it comes to fishing in the rivers, many more considerations, modifications and selected strategies are required, and since the fish of the rivers live in a higher energy environment, they are much stronger fighters than other fish that can be captured in lakes and dams .
In general, it is better to know the river system where you want to fish and what fish you want to catch, because then you can concentrate on learning about the rivers that you feed, the resting and hiding places and the behavior of your target within that system . However, the tips described here will give you a general guide that can be applied to most river systems to ensure you have a pleasant experience. However, the most important advice you should remember with all fishing is to be patient because fishing is a skill that requires time and persistence to see consistent results.
FISHING, HUNTING AND TRAPPING