Home Solar Power System: From Modest Kits to Fully Powered Systems

Home Solar Power System: From Modest Kits to Fully Powered Systems

Having a solar energy system in the home can be one step closer to living in a more ecological and sustainable future. As our planet struggles with population growth, and by producing more and more, we also pollute the environment more. The consumption of electricity continues to increase and if the trend continues to increase, we face a frightening future.

Fortunately, the rise of solar technology is like a light at the end of the tunnel. More families, individuals and even companies begin to consider the use of solar energy systems in their homes or office buildings.

In this article, we will offer you a list of the solar energy systems that you can install in your home. We will give you the pros and cons of each product, with the hope that you can make an informed decision before buying it. Of course, before buying something, you need to calculate your annual electricity consumption.

Home Solar Power System: From Modest Kits to Fully Powered Systems

You must decide if you want a solar energy system outside the network or connected to the network, and finally, you must decide whether you want it to generate 100% of the electricity, or that it feeds only a fraction of your home / commercial building.

Solar energy systems for homes.

Solar Power Kit, 235 Watt with Enphase Micro Grid-Tied Inverter

You can easily install this DIY solar energy system, with a minimum of energy and time. You only need to connect the kit to the network and you are ready to use it. You can expand the amount of solar panels so you receive more energy. The estimated amount of energy that can be received per panel is 400 kWh per year. Each panel produces 235 watts / 21V. Photovoltaic solar cells are made of polycrystalline. As a customer you will also enjoy a 25-year warranty contract.

The complete kit includes a solar panel, a converter, a micro grid connection inverter, a power monitor and a 25-foot long cable to plug into the wall. Basically, the grid connection inverter will convert the DC into AC voltage, so that it can be used by your appliances.

Home Solar Power System: From Modest Kits to Fully Powered Systems

The installation is simple and easy. Here are the steps explained approximately. Start by preparing the solar panel. Take it out in the sun and it’s time to plug the cable into a 110V socket. Be sure to comply with the rules and safety requirements of your area. You can contact the manufacturer for details on the installation in case you have problems. They can also send you an installation diagram. And finally, you can install the general solar panel 7 together with this power system.

According to a customer, it should be noted that you can not use this kit if you do not have a 120 VAC outlet. In addition, since it is a system connected to the network, it can be used whenever there is sun. Since it is not a generator that stores the sun’s energy, you use the solar panel system only when it is plugged into the wall and on a sunny day. In general, it works well, and when it comes to its functionality, it meets your goals ideally.

If you like this product you can find and check its price here.

Grape Solar GS-400-Kit solar panel kit outside the network

Although this solar panel kit can not charge your entire family, you can still use it to supplement the network system. This kit comes with 4 solar panels and is an off-grid system. The panels are monocrystalline and the junction box has LED lights to improve performance.

The kit is supplied with a 35 amp charge controller from Xantrex. The output of the inverter has a nominal power of 2000 watts and has 2 standard outputs and a USB port. The only drawback may be that the kit does not come with a battery and you need to supply your own battery. It must be a 12 volt deep cycle battery.

Home Solar Power System: From Modest Kits to Fully Powered Systems

According to the manufacturer, the solar panel kit is weather resistant, since the frame is made of anodized aluminum and the junction box is well sealed. The panels themselves can withstand a great impact, thanks to tempered glass with low iron content. The configuration and installation are simple and the maintenance itself requires practically no effort or additional time on your part.

Another thing you should know is that the panels and general configuration do not have any mounting brackets. This may be inconvenient for you, since you will have to install them separately. Otherwise, you can add more solar panels to have a higher performance. If you expand the panel configuration, you may also need an additional charge controller to manage the higher voltage. A controller can manage 5 panels (a total of 500 watts).

In general, customers are happy with the system, as it offers what it advertises. If the minor inconveniences listed above are not a concern for you, this solar grape kit could be the best option.

If you like this product, you can find and check its price on Amazon.

Astronergy medium Solar off-grid Solar energy system

Astronergy is a company that aims to reach families, corporations, companies, etc. and allow them to become more sustainable energy use. They offer different types of systems, from small to medium and large houses, the difference is in the number of solar panels.

This particular system (medium) consists of 9 panels (each 260 watts) and has an inverter of 4400 watts. This system can be used to power your entire home, including appliances that consume more energy, such as refrigerator, washing machine, etc.

Home Solar Power System: From Modest Kits to Fully Powered Systems

The sine wave inverter is considered the heart of the system. It does the DC conversion (what the panels produce) to AC (what the devices use). The installation will require the help of Four Star Solar Power Center and will make the system work in one hour.

The total amount of electricity produced by this particular solar energy system is 318 kWh per month. You can always contact the manufacturer if you need something customized for your needs.

Astronergy SolarEdge home energy system with network connection

This system is made up of products from Astronergy (solar panels) and SolarEdge (inverter). Again, these products are highly customizable and you can communicate directly with the manufacturers or with WholeSale Solar. This system is connected to the network and can use at least 10 solar panels, but you can add up to 80 (depending on the size of your house).

Thanks to inverter technology, the electricity output is improved by up to 25%. Another great advantage is that the system is designed to provide not only electricity but also high safety requirements. The solar system has a built-in mechanism to detect arc faults and prevent short circuits. In addition to that, a 25-year warranty period is granted.

Home Solar Power System: From Modest Kits to Fully Powered Systems

The reason why this solar system is different from other traditional systems of connection to the network is the following. Traditional systems tend to have an alternating electrical output if one (or more) solar panel (s) is shaded (s). This affects the entire power system and reduces the overall output on all panels. Thanks to SolarEdge, there are PowerBox optimizers, which maintain an independent output for each panel. If one is in the shade, it will give a lower output, but it will not affect the overall output of the system.

With all SolarEdge products, you are granted access to an online application, where you can monitor the output and performance of the system. You can track statistics loads, as well as faults and alerts. You only need an Ethernet cable to keep a constant tracking of the power system.

Standalone SolarPod modular system, 960 watts, off-grid

This system consists of 4 solar panels, with a total power of 960 watts. The system is ideal for homes of 120V. You can easily expand it by adding more solar panels and inverters respectively. The manufacturer also offers a 25 year warranty. The type of solar panel is crystalline, while the inverter produces a pure sine wave. Panels are shipped with the option to easily adjust when installed. You can readjust them each time you decide to do it (depending on seasonal changes). You will also get 4 pieces of battery, of a sealed AGM type of deep sleep.

The panels and the system are well sealed from unfavorable weather conditions. The total weight that the panels can support is 45 pounds per square foot. You can also remove the snow very easily. The panels can be installed in racks, so you do not need any special installation support to fasten them quickly. The general assembly of the system is very easy, and you must follow simple instructions to complete it.

Home Solar Power System: From Modest Kits to Fully Powered Systems

This particular model (# 1004) offers an output of 2000 watts, while model # 1005 doubles the output at 4000 watts. Its AC voltage is compatible with both 120 and 240VAC. The DC voltage input is much better than the model # 1004 – 60V. While the improved model # 1005 is much more expensive, it is worth considering if your needs are greater.

For example, if you want to feed a large cabin, you should use model # 1005. The previous models (# 1003 and # 1004) are for smaller cabins and a more modest use of electricity. Model # 1005 is also open for important panels and the expansion of SolarPod.

If you like this product, you can find it and buy it on Amazon.

RENOGY 400W solar panel kit, off-grid, with mounting brackets

This modest solar power kit is shipped with four 100-watt solar panels, rated A for very high energy efficiency. It has 4 stages during charging. The peak of the charge controller is 40 amps with a conversion rate of 97% efficiency. The tracking efficiency is almost 100% (around 99%). The supports are Z-shaped and should be used on a flat surface for mounting. Adapter cables (AWG 10) are UL certified and measure 20 inches.

Home Solar Power System: From Modest Kits to Fully Powered Systems

This solar energy kit is also designed to withstand severe weather conditions, no matter if it is winter or summer. The manufacturer says that it can still work well enough even in low light conditions or areas. You can install a MT-5 plotter meter if you want to monitor the performance of your system. Note that the kit is not shipped with batteries, but you can buy 4 deep-cycle batteries for approximately $ 500.

A customer warns that the system does not come with all the wiring it needs. It states that you will need two Signstek 1 male to 4 female splitters, a solar panel cable with an MC4 PV extension, heavy-duty Cobra 4-AWG AC power cable. Optionally, if you need to monitor performance, obtain the MT-5 LCD monitor.

Apart from all that, almost all customers are very happy with the product and plan to expand it with more panels.

If you like this product you can find it and buy it here.

Eco-Worthy 1000W, 10 pieces, solar module for homes.

As the name implies, this system kit has 10 solar panels, each with 100W output. This equals 1000W. The solar cells are polycrystalline and, therefore, have a high performance and durability for many years. If you buy this kit, you will get 10 pieces of solar panels, 10 solar cables, each 180 cm long and 10 pairs of MC4 extensions. In cases with optimal sun and climate conditions, the output can reach 1000W. Thanks to a built-in by-pass diode, the negative effect of shadows / shadows is minimized and panels continue to generate electricity.

Home Solar Power System: From Modest Kits to Fully Powered Systems

The junction box has an IP-65 waterproof and weather resistant rating. It also protects the system from any accumulation of moisture or particles. The panels can also withstand water at low pressure (heavy rain). They are also resistant to corrosion thanks to the aluminum frame. It can last for years (even decades). It has been estimated that the panels can withstand heavy snow loads (up to 5400 Pa).

If you like this product, you can find it and buy it on Amazon.

Another more powerful product of Eco-Worthy is its 5KW polycrystalline energy system. It comprises 28 panels, each one producing 180W of energy. You have the option of being both inside and outside the network, depending on how you install it. It has all the characteristics of the previous product, but it expands to 28 panels.

If you like this product you can find and check its price here.

Solar energy system connected to the GOWE network, up to 3,000W

The output of GOWE solar systems usually varies from a minimum of 1,500W to a maximum of 10,000W. The average output power of this particular power system is 3,000. It is an energy system connected to the network, and therefore, does not need batteries. When you make a purchase and request the product, you can contact GOWE to tell them the voltage of your home (if it is 110 V, 220 V or 50/60 HZ). This will ensure that the system works better on the voltage of your specific home network.

The best of the energy systems connected to the network is that it can connect the system to the network, and when it does not use solar energy, it feeds the network. Therefore, as we said earlier, you do not need to use batteries to store extra energy from the sun. This makes the system more economical.

You can easily install the system on your roof. The panels are ready to be immediately connected and connected to the roof. These do not come with racks, since they are designed for the installation of the house.

If you like this product, you can find and check its price on Amazon.

Full PeakSolar 10,000 watt photovoltaic system, connected to the network

On the more expensive side, this solar energy system offers a complete configuration for large houses. The system is linked to your network and, therefore, can store the excess energy in the network itself (for later use). All solar panels are made of poly-silicon for high efficiency and performance. This solar energy system is large enough to power even buildings and small business offices.

Each solar panel produces 250 watts of energy. Micro-investments are made by Enphase. You will also receive trunk cables, mounting equipment and termination covers. Therefore, you can install the system safely yourself. Of course, you can consult the manufacturer if you have doubts about your ability to install it correctly.

Home Solar Power System: From Modest Kits to Fully Powered Systems

It is even strongly recommended that you consult them anyway regarding your home network system and distribution to ensure that the solar system works as it should. They will also help you with the right amount of components you will need, depending on your home network.

If you like this product, you can find it and buy it on Amazon.

The system has built-in diodes for better performance in shaded areas (or shadows). While other modules can significantly reduce the output of solar panels in the shadows, the Peak Solar diode will minimize the negative effect of shadows. Again, you receive a 25 year warranty period on energy production. The system is listed by UL. The SMA inverter does not guarantee failures or failures of a single point in the system.

The range of products mentioned includes from the modest kits of cabin solar panels to full-power domestic solar systems. It depends on your specific needs and the size of the house / house to decide which of these suits you, but we hope to have presented a general description of the products available in the market. We recommend that you contact the manufacturer or complete the sale of the previous list and also request a free estimate on their prices (depending on your home and network system).


Like this post? Please share to your friends:
Leave a Reply

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!:

SQL - 67 | 0.168 сек. | 8.51 МБ