It has long been planned to understaff your set of tools with a small and practical gas micro-burner, which would serve as a gas soldering iron and torch. Options for such micro-burners powered by a separate tourist gas cylinder did not suit. Since in the first place I did not want to bother with buying or refueling cylinders, and secondly, such burners have large dimensions. After a little thought, the micro-burner INTERTOOL GB-0001 was purchased..
Micro burner, gas soldering iron and torch INTERTOOL GB-0001, device, refueling and preparation for work, overview.
The INTERTOOL GB-0001 microburner is made in the form of a pencil, its one-piece aluminum body is also a reservoir for liquefied gas, from which it works. The total weight of the burner is 73 grams; the volume of gas to be charged is 12 ml.
lighters or matches.
Functions of the micro burner INTERTOOL GB-0001.
The micro-burner INTERTOOL GB-0001 is a universal tool that can perform the functions of a gas soldering iron or torch. Perfect for performing various work on heating and soldering, as well as ignition and heating. The micro burner can work in any position. It is convenient for her to work in confined spaces where you can not get a lighter.
Micro burner INTERTOOL GB-0001 can be used.
When assembling or disassembling parts.
For welding small metal objects.
For soldering work.
For firing paint coatings in limited areas.
For crimping heat shrink tubing.
In nature, a micro-burner will be in demand for igniting raw kindling when making a fire, or burning firewood in a barbecue. She will find application even in cooking, for example, at the final stage of cooking various dishes, to make on top of them a delicious crust of grated cheese.
Gas station and preparation for operation of the micro-burner INTERTOOL GB-0001.
Before refueling the micro-burner, it is necessary to close the valve regulating the gas outlet and fill it from the gas can for lighters through the filling valve. A full refueling takes about ten seconds. After refueling, wait a couple of minutes to stabilize the gas pressure in the tank.
matches or lighters. Then adjust the desired flame height with the valve and you can get to work.
Maintenance of the micro burner INTERTOOL GB-0001.
Despite the simplicity of design, like any other tool, the micro-burner GB-0001 requires maintenance. Since all types of butane gas in one or another quantity contain some impurities, from time to time it is necessary to clean the atomizing nozzle of the burner, as it becomes clogged with carbon and this can adversely affect its efficiency. To clean the nozzle, it is necessary to remove the nozzle from the micro-burner, unscrew the nozzle fixing nozzle, remove it from the housing, and then clean all the removed parts using any universal cleaner, and then blow out all with compressed air.
Review of the micro burner INTERTOOL GB-0001, its shortcomings.
Over the past month of operation, there are no special comments on the operation of the micro burner. As minor flaws, a small range of adjustment of the height and power of the flame, the unstable operation of the micro burner in the weakest mode, especially in cold weather, and the inability to normally control the remaining gas in the tank can be noted.