Parachute Cord Bracelets: How to Choose One and Use it

Parachute Cord Bracelets: How to Choose One and Use it

Throughout the years, adventurers have relied on simple and lightweight tools that help them survive and be safe in the environment in which they find themselves. From fireproof tents and fast-drying fabrics to knives that do not need to be sharpened and footwear that grip. the land; Each survival tool becomes even better as production technology becomes more fluid, more efficient and more advanced.

The parachute rope bracelet, or “paracord bracelets” for enthusiasts, is relatively new to an adventurer’s arsenal of tools, but the science behind it has remained unchanged as the years go by. As the name defines it, a paracord bracelet is made of the same material used for the parachute suspension lines and, although it is mainly used by the military, it has become a staple in civil service teams due to its versatility, resistance and flexibility.

Parachute strings: A brief history.

The parachute cables are made of a lightweight nylon rope called Kernmantel It was introduced in 1953 by a German company called Edelrid, which aimed to revolutionize the rope industry by minimizing injuries caused by accidents due to falls during speleology or climbing exercises.

The arrival of this new rope technology pushed the then favored rope materials, such as hemp ropes, to the edge of non-existence in activities that will require the strength and flexibility of a kernmantel.

The last sixty years have done little to affect the design and construction of kernmantel ropes despite innovations that typically aimed to reduce the time taken to produce the ropes.

Variations are made to the characteristics of the rope in order to fulfill the true purpose of said variation. For example, the mantle, or outer layer, is woven heavily for ropes that will be used to dig. These modifications come with commitments however; The ropes used for caving are difficult to knot, as the robe will be too stiff due to the way they were woven.

Composition of the parachute cord

The term kernmantel is actually a German word meaning “core” and “shells”; the sheath refers to the outer layer, or mantle, and the core refers to the braided strands inside the jacket. The mantle is made of 32 strands of nylon, while the core is composed of nylon strands of two layers that vary from 7 strands on, depending on the intended use.

Parachute Cord Bracelets: How to Choose One and Use it

In the creation of a kernmantel rope, great care is taken as regards the diameter, the weight to be supported and the projected force that will impact the rope during use. Kernmantel cords can be used as a dynamic or static rope. The dynamic ropes are used to hold and can be stretched to provide additional support in case of a sudden fall. The static ropes offer little stretch and are used mainly to transport materials and tie things.

Transformation of the bracelet

In the market there are available parachute rope bracelets made with different designs and prices. Some are made of two or more pieces of parachute cord, while others have a small knife hidden between the braids of the bracelet.

Parachute Cord Bracelets: How to Choose One and Use it

While this is the easiest option, you can always make your own bracelet and create your own design.

Materials needed

  • Parachute rope, preferably more than 12 feet.
  • Buckles, the one found in the bags.
  • scissors
  • Lighter
  • Candle
  • Marker
  • Ruler or tape measure (those used by tailors)


  1. Preparing the rope.
    • Make sure that the ends of the rope do not fray and are cut uniformly.
    • If the core is exposed, cut the exposed portion for a more pleasant burn.
    • Light the candle and apply the flame to the rope by twisting the rope evenly, pausing for approximately 2-3 seconds per turn.
    • Once the ends have melted, close them with pliers.
    • Creating the male half of the buckle.
      • Take the male half of the buckle and the two ends of the cord and insert them into the lower slot.
      • Pull both ends until the “u-turn” arc is close.
      • Slide both ends into the bow and pull until a knot forms, securing the male half in place.
      • Size
        • Measure the doll by wrapping the measuring tape around it.
        • Wrap the tape tightly to get a more accurate measurement.
        • Place the tape measure from side to side with the string, the male half of the buckle should be at the zero point of the tape measure.
        • Flatten both the tape and the string and check where the measurement is on the string.
        • Add about an inch to a good measure.
        • Preparing the female.
          • Insert the loose ends into the female half of the buckle and pull until it reaches the predetermined measurement of the wrist.
          • Secure the female in place by creating a knot with loose ends.
            • Take the left end and knit under the ropes.
            • Take the correct piece and cover it over the middle cords and insert it into the loop created on the left.
            • Pull tight until a knot forms.
            • Braid
              • To braid the entire bracelet, repeat steps 4.b.i to 4.b.iii until one reaches the male half of the buckle.
              • Pull the male half from time to time to tighten the braids towards the female half, allowing more space to braid.
              • Ending
                • Once the slack is achieved and the end of the wristband is reached, it can now be closed with the last braid and the loose ends.
                • Take both loose ends and insert them into the slot available in the male half and bring them back.
                • Unravel the last braid and insert the loose ends and pull firmly.
                • Cut the rope a quarter of an inch from the last braid.
                • Close the cut using the candle technique used in Step 1.

                Buying a parachute rope bracelet

                If in case one does not have the skill set necessary for a DIY project, here are some tips you should keep in mind when investing in parachute rope bracelets.

                • Use -What will be the use of the untangled bracelet? Do you expect a strong impact on the cables?
                • Length – The design of the parachute cord bracelet depends on the fabrics that were used, some fabrics or simple patterns provide approximately one foot of parachute cord per inch of the cuff, while some complicated fabrics, such as the King Cobra fabric, offer double than for every inch of wristband.

                Like most products on the market, there are some parachute wristbands out there. These are dangerous to buy since they can not guarantee one’s safety.

                To determine if the parachute rope bracelet is false or not, the following tests can be done to determine the authenticity.

                1. Core verification – Some fake bracelets have no internal cord and are filled with cotton-like materials. Ask that you first check the core of the parachute cord.
                2. Strand check – check the strands for the materials that were used, the fake bracelets commonly use cotton and only have four strands in the core. They also wrinkle once they are removed from the holster, while the real ones are still straight even after being removed from the holster.
                3. Pod control – the false bracelet sheaths easily retract and fray when cut, while the real ones remain intact unless force is applied.
                4. Rigidity – A true parachute rope bracelet, once it has not been disarmed, will not unfold easily, it will remain rigid for a while.
                5. Fire – Disclaimer: ask permission first before doing this test. The real parachute cord bracelets will melt while the fake ones will light up like a candle wick.

                Survive with paracord bracelets.

                Specifically for outdoor athletes and survivors, parachute cord bracelets have many verified uses and there is still a potential that has not yet been explored.

                Parachute Cord Bracelets: How to Choose One and Use it

                Below is a list of the known uses of paracord bracelets and how to use them effectively in their particular scenarios.


                One of the basic basic needs of any human being, surviving outdoors is almost impossible if one is not able to feed.


                Create a bow:

                • Find a good sized stick that does not break easily.
                • Unravel one of the center wires and tie them on one end of the stick.
                • Pull the rope slowly and smoothly until the end so that the stick bends like a bow.
                • Firmly tie the other end and verify that the line is not taut.
                • Point and shoot.


                Find a good fishing spot.

                • Remove one of the central cables.
                • Form a hook of a safety pin.
                • Take the line

                If there is no available hook, remove all main cables and create a gill net.

                • Place all the laces.
                • Organize one game going up and down while the other goes from left to right.
                • A simple knot at intersections.
                • Pull and wait for a capture.


                Fix traps using the central cables.

                • Explore a place where animal trails run through.
                • Find a discrete location.
                • Place two stakes on the ground.
                • Create a simple sliding knot.
                • Hang the loop in the stake notches and wait.


                Another basic element is that the shelter protects us from the elements, ensuring that one can survive and return home.

                Improvised shelter:

                • Gather some sturdy branches or trunks to serve as a frame.
                • If a canvas is not useful, it gathers leafy branches as well.
                • Unroll the bracelet and secure the frame with the laces.
                • Secure the canvas or the leafy branches with the remaining laces. This type of shelter is called lean-to.

                Repair a tent:

                • Unravel the internal cords and use them as thread to sew the torn parts of the store.
                • If there is no needle available, use the wires to make a rudimentary one so as not to seal the space.

                Secure the store:

                • Sometimes, the weather simply does not cooperate no matter how good the start of the trip is. In case of high winds, use the paracord bracelet as an additional line to provide additional support.


                • Parachute rope bracelets can also be used to secure a hammock to a tree. One should not untie them to preserve the integrity to the traction.

                First aid

                Accidents happen at any time and, in addition to the standard first aid kit, parachute cord bracelets can also be used for the following:


                • Depending on the extent of the injury, one may choose not to untangle the internal cords and simply secure the splints with the non-woven wristband.


                • Dynamic ropes are not effective as tourniquets because they will stretch and, therefore, will defeat the purpose of a tourniquet. On the other hand, static cords can help stop bleeding as long as you pull hard and check from time to time to see if it is loose.

                Emergency sutures:

                • Internal cords can also be used as emergency sutures for open wounds, especially if medical help is far away. Keep in mind that this is only for really desperate situations. Parachute cord bracelets are not hygienic, unless they are treated with steam and antibacterial solution.



                • Cose tears using the internal cords.
                • Use the paracord as an emergency bandolier.


                • Undo the center cables and use them as a replacement for the cords of the broken shoes.
                • Use the internal cords to provide additional strength in difficult terrain.
                • Sew the broken shoes together using the internal laces.


                • Undo the internal cables and use them as thread to repair the clothes.

                Floss with him:

                • In case of an emergency, the internal cord strands can be used as an improvised dental floss. Make sure you clean it later.

                Hang with that:

                • Parachute cables can withstand heavy loads and, therefore, can be used to hang bags or tools from a tree or belt. You can also hang food from the ground to deter wild animals from reaching it.

                Belay with it:

                • The bracelets can be unwound, tied together with secure knots and then serve as rescue or fastening ropes.

                Dry with it:

                • Non-woven wristbands can also be used as a drying rack for drying wet things, as well as for curing meat and / or fish.

                Secure things with it:

                • Given the material used, parachute cord bracelets can also be used to secure trash bags to backpacks or backpacks for vehicles or trees.
                • Paracord bracelets can also be used to secure boats to a tree or skiff.

                Discover fire

                • This requires a much more advanced skill set, but anyone who has gone through the puppy scouts can do this trick.
                  1. Using the arc method, one can start a fire by collecting:
                  • a branch that would not break easily when folded to serve as an arch
                  • a stone to serve as a socket
                  • Another piece of wood like the spindle.
                  • A flat piece of wood like the fire board.
                  • a little tinder
                • Create a small bow using the flexible branch and wind the rope on the shaft.
                • Place a little tinder in the notch created in the fire board.
                • Hold the axle in place while performing a saw motion with the bow.
                • Move it faster to create fiction, which in turn will generate heat and light the tinder in the notch.
                • Never miss

                  • Probably one of the most important reminders for all outdoor men is to observe the path to avoid getting lost.
                  • As taught in basic mountaineering, one can make trail markings as they go. This would also help others determine the right path.
                  • Unravel the bracelet and cut the string into pieces, about 6 inches long.
                  • Tie the pieces in the trees, especially in areas of concern such as forks and water sources.
                  • One can choose to untie the pieces when they return or leave them for other enthusiasts as a courtesy signal.

                  Maintenance bracelet

                  Kernmantel parachute cord bracelets should be checked before and after any outdoor activity for damage such as frayed ends, stressed sections, and worn casings.

                  The frayed ends should be cut cleanly and applied flamed to close them. Stressed sections are often the thinnest sections of the rope, you can choose to cut it and tie the remaining pieces. Worn covers appear in laces that have been widely used in caving and rappelling; they appear as cuts along the mantle and vary in size. Severely damaged cables should no longer be used outdoors, as their integrity is compromised and may not meet user demands.

                  Parachute Cord Bracelets: How to Choose One and Use it

                  Kernmantel is washable and it is possible for a user to place their parachute cord bracelets on the belt of their pants and then throw them to the wash. Another recommended method is to use soap, water and an old toothbrush to give the parachute rope bracelet the tender care it deserves.

                  Parachute cord bracelets are an indispensable survival tool that is currently gaining popularity thanks to reality shows and their hosts, such as Bear Grylls, who has sponsored the use of bracelets during their periods.

                  Useful tools

                  Like this post? Please share to your friends:
                  Leave a Reply

                  ;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!:

                  SQL - 67 | 0.206 сек. | 8.64 МБ