Paracord Keychain: DIY Projects for Your Safety And for Money

Paracord Keychain: DIY Projects for Your Safety And for Money

Paracord bracelets are a fashionable trend accessory among enthusiasts and lovers of outdoor activities, and although they come with different designs and designs in general, some will try to find another way to carry their Paracords along with their other handwear or EDC. Some enterprising people have found laces, anklets, necklaces and other things, but among these new incarnations of the paracord bracelet is the paracord keychain.

The key rings, or key rings in other countries, are useful when it comes to locating the keys or placing similar memories. They can be attached to a bag at the beginning of the zipper or they can be attached to your carabiniere and then to your belt buckle. The keyrings have a variety of uses other than the retention keys and this applies to the paracord keyrings.

Paracord Keychain: DIY Projects for Your Safety And for Money

It is possible that there are a thousand and one paracord projects that can be carried out and, given the strength of the paracord, the purpose and size of these projects is also quite expansive.

Some examples of projects you can do using parachute cables are:

  • Rifle slings
  • To take advantage of
  • Bag
  • Wallet
  • Belts
  • Koozies
  • Traps
  • Lanyard

The easiest of these will be the parachute cord bracelet and the key rings.

Paracord Keychain: DIY Projects for Your Safety And for Money

Paracord bracelets involve basic loops and knots, and sometimes you can tighten one or two additional features. This is the same for key chains, you can have monkey balls, hidden compartments and you can even shape your keychain in a grenade or a cross.

Keychains join!

Making your own Paracord keychain is quite easy and it will take a little time to create it. The great value of learning to make a paracord keychain is that you can mass produce them to give them to your friends or sell them online or even provide a specialized store with them. There are several varieties and here are the instructions to do some of them.

When doing any paracord project, always remember that for every inch of finished product you want to do, you will need the same length in parachute cable feet. For example, you would want a 12-inch paracord cord, and then you would need 12 feet of parachute cable to cover the entire length. This can still be adjusted depending on the type of fabric you want to use for your project. The more complex, the longer the cable you need.

Simple paracord keychain using the cobra fabric.

The most basic of all paracord keychains, this uses a standard cobra fabric.

Paracord Keychain: DIY Projects for Your Safety And for Money

It is easy to untangle and can easily hold up to 12 feet of parachute cable.

Materials needed

  • scissors
  • ruler
  • Lighter
  • Key chain
  • A length of Paracord, any thickness.

Instructions

  1. Take your parachute cable and insert one end into the key ring and then pull it until the midpoint of the paracord is on the key ring.
  2. Using the ruler, measure approximately 6 inches from the key ring and make a mark. This brand will be the starting point for your cobra fabric.
  3. Start making your cobra fabric by twisting one end, usually the right, under the main shaft and under the other cable; Wind the left cable over the top of the main shaft and through the loop created by the right cable. Be sure to pull the cables firmly before moving on to the next assembly.
  4. Repeat this step until you approach the key chain.
  5. Leave some space between the key ring and the loops.
  6. Cut off excess parachute cables, as close as possible to the loop.
  7. Burn the ends with the lighter until the strands have melted.

Video:

Simple cobra fabric keychain with two different colors

This is an elegant version of the first key ring that was discussed.

Paracord Keychain: DIY Projects for Your Safety And for Money

The fabric of the cobra is also called the Solomon bar.

Materials needed

  • scissors
  • ruler
  • Lighter
  • Key chain
  • Carabineer
  • 2 pieces of equal length of Paracord, must be two different colors, any thickness

Instructions

  1. Take your parachute cords and with the lighter, merge at one end.
  2. Tie a Lark’s Head knot in the loop of the smaller carabiner using the cast joint as the midpoint.
  3. Take the loose ends and pass them around the key ring. You can measure the desired length using your ruler at this point.
  4. Once you have taken the measurements, start making your cobra fabric by winding the right cable under the main shaft and under the left cable. Pass the loop on the left over the main axis and through the loop created by the right cord.
  5. It is important, at this point, to remember that any color that is on top of your fabric must be the same at all times. Doing the opposite will result in another fabric that you will learn later.
  6. Pull the cables firmly to ensure that the fabric of the key ring is compact and does not come apart easily.
  7. Repeat step 4 until you approach the carabiniere, leaving a little space in the middle.
  8. Cut off excess parachute cables, as close as possible to the loop.
  9. Burn the ends with the lighter until the strands have melted.

Video:

Monkey fist paracord keychain

This keychain can also serve as a self-defense tool, as it can act as a club when necessary. Although there is no need to put spikes.

Paracord Keychain: DIY Projects for Your Safety And for Money

Materials needed

  • scissors
  • ruler
  • Lighter
  • Keychain or carabiner
  • Super glue
  • A small ball bearing or a good size marble.
  • A paracord length, can be of two different colors, any thickness

Instructions

  1. Take your ball bearing or marbles and super glue one end of the parachute cord over the ball or marble bearing. You do not have to stick like that as long as you can stick around long enough to help you start building your knots.
  2. Place the ball or marble between your index finger and middle finger, take the paracord and twist it around your index and middle fingers five times towards your fingers. Once the cable is halfway in its fifth loop, extend it a little around your middle finger and then push the ball bearing into the middle of the two loops you just made.
  3. Using your middle finger as a base point, re-wrap the cord around the ball, this time going through the space created by the bearing, effectively wrapping the first set of loops you made before.
  4. Remove the fingers from the loops and then pass the cord around the space where the fingers were previously, completing five loops. You must have three loops that do not intersect.
  5. Locate the first loop in the first set of loops you made and tighten them. Repeat this for the two remaining sides. After these steps, you should have a strongly woven ball or a monkey fist.
  6. With the remaining cable, you should be able to make any knot or tissue you want; you can add another color by attaching it near where the original string of the ball comes out and knits.
  7. For this example, the other end is closed by winding the cable to the end and then wrapping the rest towards the monkey’s fist.
  8. You can also close this project by placing a carabinier or a key ring on the other end, or a key ring with a carabinier also works well.
  9. Cut off any excess cable and burn the ends with the lighter until the strands have melted.

Video:

Paracord king cobra keychain

The King Cobra is a thicker version of the Cobra Weave keychain.

Paracord Keychain: DIY Projects for Your Safety And for Money

But the added circumference also means an additional length to your parachute cable that can be useful during emergencies.

Materials needed

  • scissors
  • ruler
  • Lighter
  • Keychain or carabiner
  • A length of Paracord, can be of two different colors, any thickness

Instructions

  1. Find the center of the cable and mark it with an elastic band or you can move forward and insert the key ring. Create a Lark head around the key ring and measure how long you want your key ring to be.
  2. Once you have measured your desired length, start making your cobra fabric as explained above.
  3. Once you are near the key ring, you can choose to close the first set of cobras by tying a simple knot or you can simply add forward and continue. This time, create a cobra fabric over the first set of cobra fabric that you just made, going in the other direction.
  4. Be sure to pull the cables from time to time to make sure the entire key ring is tight.
  5. Close the King Cobra key ring by cutting the excess rope at the end of the outer cobra fabric and burn the loose strands with the lighter.

Video:

Paracord keychain bag multitool

This variety of keychain is very useful, especially if you have limited space to put in your multitool.

Paracord Keychain: DIY Projects for Your Safety And for Money

Materials needed

  • scissors
  • ruler
  • Lighter
  • Keychain or carabiner
  • Multiple tool
  • Parachute rope weaving needle
  • A length of Paracord, can be of two different colors, any thickness

Instructions

  1. Take your paracord and make your standard cobra fabric, using the key chain or the carabinero as the midpoint or anchor point. The cobra fabric will act as the main structure of the bag.
  2. To verify if you have the correct length of cobra fabric, take your multitool and wrap the cobra fabric around it, once you can enclose it, you will have the correct length of cobra fabric. Make sure it allows a bit of excess tissue that will serve as the opening.
  3. With your multitool still wrapped around the cobra fabric, run the outer loops of the cobra fabric with a fid. Use a standard input and output pattern for each side. There should be two loose ends after you finish your cobra fabric and you should be able to use both for your respective sides.
  4. Once you have finished knitting the ends in and out of the sides, pull the fabric to tighten them accordingly.
  5. Cut off any excess cable and burn the ends with the lighter until the strands have melted.

Video:

DNA paracord keychain

Another elegant variety of the parachute cable, this is also easy to unravel.

 Paracord Keychain: DIY Projects for Your Safety And for Money

Materials needed

  • scissors
  • ruler
  • Lighter
  • Keychain or carabiner
  • A length of Paracord, can be of two different colors, any thickness

Instructions

  1. To start making the DNA keychain, put the paracord through the keychain or carabinero and find the midpoint.
  2. Once you have the midpoint, measure the desired length of your keychain and mark the place with a rubber band or string.
  3. The first step in making the DNA tissue is similar to a cobra tissue. The difference begins in the following fabric where, instead of maintaining the same side or color along the fabric, alternate the colors or the sides when carrying the cable to the top and vice versa.
  4. Repeat the process until it reaches approximately one-half inch near the key chain or carabiner.
  5. Close the key ring by cutting the excess rope at the end and burn the loose strands with the lighter.

Video:

Paracord shaped grenade keychain

A thicker, well-formed version of the King Cobra and Cobra fabrics, other variants of the paracord grenade keychain includes a hand sanitizer in the middle, which earned the nickname, Germ Grenade among the enthusiasts.

 Paracord Keychain: DIY Projects for Your Safety And for Money

Materials needed

  • scissors
  • Lighter
  • Key chain
  • A length of Paracord, can be of two different colors, any thickness

Instructions

  1. Begin with the grenade keychain by locating the midpoint and then attaching a standard diamond knot.
  2. Measure the desired length of the keychain and then create your first cobra fabric. Repeat the cobra fabric until you reach the diamond knot at the end.
  3. Once you have finished with the first cobra fabric, make another one over the first one, for example, how you would do it for a king cobra fabric. After you have finished the second layer, turn it around and make a third cobra fabric and a quarter.
  4. Like all other keyrings, cut off any excess rope from the parachute and burn any loose strands until they melt.

Video:

Paracord keychain with a hidden compartment.

Probably one of the best paracord keychain projects out there.

Paracord Keychain: DIY Projects for Your Safety And for Money

This includes a secret compartment where you can store knives, small pens, even cash.

Materials needed

  • scissors
  • Lighter
  • Pencil
  • Keychain or carabiner
  • Three equal lengths of Paracord, can be of three different colors, any thickness

Instructions

  1. Take two strands of your paracord and cut them in the center to form a cross. From this point, C1 will refer to the horizontal cable, C2 will refer to the vertical cable and C3 will refer to the third cable that will be used in a moment.
  2. Form an S shape using C1. You need to go through C2, then below and then again.
  3. The upper part of the fabric of C2 must go through the upper loop of C1 and then below the lower loop of the S that you made with C1.
  4. Using the other end of C2, cover it over the lower loop of C1 and then under the upper loop of the S-shape.
  5. Pull the wires to tighten the knot, but keep it a little loose for the next step.
  6. Take C3 and insert it into the S shape created by C1, going below the top and bottom and over the center section. Pull C3 until you reach the midpoint.
  7. Pull C1 and C2 again to tighten the first knot.
  8. Extend all the strands like a six-legged starfish. At this point, the right end of C1 will be C1R, and so on. The left end of C1 will be called C1L and so on.
  9. Take C3R and turn it down and over C1R, then take C1R and cross over C2R, repeat the process until all the threads have crossed down and on the adjacent one.
  10. Pull all the wires to tighten the knot. This knot is called the closed crown knot.
  11. To create the secret compartment, complete four or five knots of the crown and then insert a pencil in the center of the knots, make sure the pencil is on top of the first knot.
  12. Continue knitting the crown knots around the pencil until you have reached the desired length.
  13. Close the knots of the crown with a diamond knot. Grab any of the strands and place it under the next loop in the series. Pull it and repeat the process for all the remaining strands.
  14. Pull the threads to tighten the knot enough to hold them all together before removing the pencil.
  15. You can choose to retain the excess length of the parachute cable to serve as a design feature or you can cut it one by one after the diamond knots and then burn the threads until they melt.

Video:

Paracord keychains can take many forms and fabrics can be interchanged and even mixed to create a unique design.

Like many survival tools, paracord keyrings need adequate maintenance to last and any observed defects must be analyzed to determine if the keyring should be used in emergency situations or not.

DO IT YOURSELF

Like this post? Please share to your friends:
Leave a Reply

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!:

SQL - 63 | 0.243 сек. | 9.06 МБ