UTactic TacTel smartphone case, purpose, specifications, device, performance, overview.

The UTactic TacTel smartphone case has an adaptive design and is primarily intended for convenient and safe carrying of mobile phones and smartphones. As well as radio stations, powerbank, battery packs and other size-compatible electronic gadgets and portable devices requiring protection against possible mechanical damage.

UTactic TacTel Smartphone Case, Purpose, Features, Device, Performance, Overview.

The UTactic TacTel case has a three-layer design. The outer walls are made of Cordura 1000D with a polyurethane coating. The inner walls are made of dense nylon. Between the walls there are soft damper inserts. Polyamide slings are sewn onto the cover walls. Accessories of the Italian company Due Emme (2M). The workmanship itself is very decent. There are no complaints about the cut and quality of materials.

UTactic TacTel smartphone case, purpose, specifications, device, performance, overview.

Key Features of the UTactic TacTel Smartphone Case.

Dimensions: 14 x 9 x 2 cm
Weight: 60 grams

Structurally, the cover for the UTactic TacTel smartphone is a solid three-layer panel, which is folded in half and pulled together with an elastic cord with a plastic retainer. This cord also provides lateral adjustment of the width of the cover. Three standard MOLLE PALS slings are sewn from the front. There is also a small open pocket. The entrance to it is hidden by a central sling. The sides of the cover walls are reinforced with a nylon sling..

UTactic TacTel smartphone case, purpose, specifications, device, performance, overview.

On the back of the case for the UTactic TacTel smartphone, five rows of lines are sewn into which two removable fastening tapes with buckles are tucked. These tapes allow you to fasten and fix the cover on a backpack, bag, pouch or any other equipment that has a compatible MOLLE interface. In addition, they allow you to attach the cover to waist, cargo or other belts and belts up to 70 mm wide.

At the top of the case for the UTactic TacTel smartphone is an adjustable removable latch. It is made of a separate elastic cord and a four-fold nylon sling. This lock is designed to insure and prevent the loss of devices and gadgets in the case.

UTactic TacTel Smartphone Case Performance.

Smartphones have long and firmly entered our lives not only as a convenient means of communication, but also as a gadget designed to solve many other problems. It was for carrying and protecting against mechanical damage in the field of a smartphone with a screen diagonal of 6 inches, the UTactic TacTel case was purchased.

UTactic TacTel smartphone case, purpose, specifications, device, performance, overview.

A smartphone of this size simply can’t be put in your pocket. He is tangibly interfering there. And the usual urban pouch case from this smartphone, the necessary degree of protection against accidental mechanical influences, which is not uncommon in the field, clearly did not provide.

In general, the UTactic TacTel smartphone case showed itself only on the positive side. Initially, it was somewhat inconvenient to put a smartphone in a case. The lateral elastic cord interfered and therefore it was required to use both hands. It was not always convenient. I had to adjust and slightly loosen the tension of this cord in the upper part. After which there were no special problems. As you get used to the case, the smartphone can be invested in it even with one hand.

UTactic TacTel smartphone case, purpose, specifications, device, performance, overview.

The dimensions of a smartphone with a screen of 6 inches, moreover, laid in a bookcase, are almost the limit for the size of the UTactic TacTel case. Although for some time it managed to transfer a more voluminous smartphone. In addition to smartphones, the short-term cover was used to carry the Garmin GPS navigator and a power bank for two 18650 batteries. In all cases, it provided convenient carrying and the necessary degree of protection.

The front pocket of the UTactic TacTel case was used from time to time and for completely different things. Basically there are briefly:

Banknotes.
Bank cards.
Lighter.
Flash drive.
Short length OTG cable.
SOG CrossCut scissors.
SOG MacV Tool multitool.
Flashlight Klarus ST11.
And a couple of times business cards.

But it should be recognized that this pocket on the case is very convenient in terms of just such a short-term operation.

UTactic TacTel smartphone case, purpose, specifications, device, performance, overview.

UTactic TacTel Smartphone Case Summary.

Very comfortable and functional thing. Thanks to its soft walls and retainer, the TacTel case really protects your smartphone from accidental damage. The universal mounting system allows you to place it in the most unexpected places, depending on the tasks and what is in the case at the moment.

For example, by placing a powerbank in a case, you can safely fix it on the outside of the backpack or on the belt. This makes it possible to recharge the smartphone literally on the go with a standard length charging cable.

The UTactic TacTel smartphone case can be safely recommended to all lovers of outdoor activities and spending time outdoors. Although in the city it will also be more than appropriate. It will provide high-quality transport of compatible in size electronic gadgets or any other devices and objects. As well as their basic protection against loss or accidental mechanical damage.

Like this post? Please share to your friends:
Leave a Reply

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!:

SQL - 53 | 0.354 сек. | 9.15 МБ